Pioneer Attaching the battery pack and player PDV-LC10 only, Attach the battery pack to

Using the Battery

Attaching the battery pack and player (PDV-LC10 only)

Attach the battery pack and player to the battery case as described below.

1	2	Battery pack operation
	1	Attach the battery pack to the
	1	battery case.
		1 Fit the terminal side of the battery
		pack into the battery case.
		2 Push in until it clicks.
	2	Attach the player to the
		battery case.

BEFORE USING

2

1￿

￿

2￿

￿

3

1Align the guide hole on the rear of the player with the rear guide on the battery case.

2Push in the front part of the player until it clicks.

3Set the power switch of the player to ON.

•Now the player can be operated.

•When the battery pack is fully charged, the player can play DVDs for about 3 hours and 30 minutes continuously.

•If the power is switched on while the battery pack is not fully charged, the player operation may sometimes become unstable. Be sure to charge the battery pack fully before use.

ON/OFF HOLD

38

En