Pioneer PDV-LC10 Playback Functions, Loading discs, Press Push Close to close the lid

Playback Functions

Loading discs

1

2

1Hold the display and operating section securely and lift the display (PDV-LC10 only).

2Slide the main unit’s OPEN switch to the # side and open

the lid.

The following message appears on the display window:

OPEN#

BASICOPERATION 3

4

48

3Set the disc in place and press down on the disc with your

fingers near the center hole.

A click is heard.

Notes:

•Set the disc securely. Failure to set it securely could result in damage.

•Do not use cracked or warped discs. Doing so could result in damage.

•Set single-sided DVDs or CDs with the label (printed) side facing upwards. For double-sided DVDs, check the side carefully, then load the disc securely (until a click is heard).

•With CDs or one-sided DVDs, you do not have to worry about touching the label (printed) side of the disc with your fingers. Two-sided DVDs, however, have signals recorded on both sides, so be careful not to scratch them when removing them from the player.

4Press PUSH CLOSE to close the lid.

En