Pioneer PDV-LC10 operating instructions Setting the TV System switch, About MOD. Modulation PAL

Remote Control Unit and Main Unit Preparations

BEFORE USING

Setting the TV SYSTEM switch

TV SYSTEM switch

Video output changes as follows according to the playback disc‘s recorded format.

NTSC = PAL, PAL = NTSC conversion is possible on Video CDs. PAL = NTSC conversion is not possible on DVDs.

When the TV SYSTEM switch is set to the AUTO position, the disc’s format will be output as is. When a CD or disc is not loaded, the previous video output format will be selected.

T V SYS T EM

N T S C / L C D

A U TO

P A L

About MOD. (Modulation) PAL

•SHRINK

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

•If your PAL TV does not have a V-Hold control, you may not be able to view NTSC disc because the picture may roll. If the TV has a V-Hold control, adjust it until the picture stops rolling. On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunction; it is caused by the NTSC = PAL conversion.

PDV-LC10

Position of TV	Liquid crystal	DVD		Video CD		CD, No disc
SYSTEM switch	display	NTSC discs	PAL discs	NTSC discs	PAL discs
NTSC/LCD	Power on	NTSC		NTSC	NTSC	NTSC
AUTO	Power off	NTSC	PAL	NTSC	PAL	NTSC or PAL
PAL	Power off	MOD.PAL	PAL	MOD.PAL	PAL	PAL

Note:

With the PDV-LC10, when the TV SYSTEM switch is set to anything other than “NTSC/ LCD”, the Liquid Crystal Display (LCD) is turned off.

18

En