Pioneer PDV-LC10 KHz PCM signal setting, Mpeg signal setting, Various Digital Signal Settings

Various Digital Signal Settings

96 kHz PCM signal setting

96 kHz PCM is a high quality audio format with a far higher sampling frequency than the 44.1 kHz format used for CDs. This format is used mainly for music DVDs. There is no need to make this setting if the “Digital Jack” setting has already been made with the Setup Navigator.

English

Audio1 2 Video Language General Other
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out	96kHz 348kHz
MPEG Out – 96kHz
i Switch 96kHz audio output mode
Move	SETUP	Exit

•96 kHz 3 48 kHz: The 96 kHz signals are down-sampled to 48 kHz before being output. In this mode a Dolby Pro-Logic amplifier or an amplifier equipped with a digital input can be used.

•96 kHz: A 96 kHz compatible amplifier or D/A converter is required to select this mode.

Settings: 96 kHz 3 48 kHz*

96 kHzThis setting can be changed during playback.

*Factory setting

MPEG signal setting

MPEG is one audio format used with DVDs. There is no need to make this

setting if the “Digital Jack” setting has already been made with the Setup Navigator.

ADVANCED

Audio1 2 Video Language General Other
Dolby Digital Out – Dolby Digital
DTS Out – Off
96kHz PCM Out – 96kHz 348kHz
MPEG Out	MPEG
	MPEG 3PCM
i Switch MPEG audio output mode
Move	SETUP	Exit

Settings: MPEG

MPEG 3 PCM*

*Factory setting

•MPEG: An MPEG compatible amplifier or D/A converter is required to select this mode.

•MPEG 3 PCM: The MPEG signals are converted into linear PCM audio signals (48 kHz) before being output. In this mode a Dolby Pro-Logic amplifier or an amplifier equipped with a digital input can be used.

This setting can be changed during playback.

OPERATIONS

73

En