Pioneer PDV-LC10 operating instructions Amp Connection

Making Settings with the Setup Navigator

Setting the type of amplifier to be connected (amplifier’s 96 kHz

compatibility)

Here set whether or not the amplifier connected to the player is 96 kHz compatible. When an option is selected, 96 kHz or 48 kHz (96 kHz=48 kHz) linear PCM audio is set automatically.

Main unit Use the cursor buttons (5/°) to

select the amplifier’s 96 kHz compatibility, then press the

ENTER ENTER button.

Cursor	Audio1 2 Video Language General Other
	Setup Navigator
buttons
	Amp Connection		No
	96 kHz PCM Audio		Yes
			Don't Know
	i Digital jack not compatible with 96 kHz
	Move	ENTER	Select	SETUP	Exit

BASIC OPERATION

46

Remote control unit

ENTER
Cursor
buttons	4		¢￿
	1	3	Á￿
	e	8	E 7

•No: Select this when the amplifier connected to the player is not 96 kHz compatible. When this is selected, the 96 kHz signals are down-sampled to

48 kHz before being output from the digital output jack.

•Yes: Select this when the amplifier or D/A converter connected to the player is 96 kHz compatible. When this is selected, 96 kHz linear PCM signals are output from the digital output jack. Note however that it is not possible to output 96 kHz digital audio signals from some discs recorded in 96 kHz.

•Don’t know: Select this if you do not know whether the amplifier connected to the player is 96 kHz compatible or not. When this is selected, the 96 kHz signals are down-sampled to 48 kHz before being output from the digital output jack.

En