Cleaning and care
To reduce the risk of electrical shock, disconnect the appliance from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before maintenance.
Never use cleaning agents containing abrasive substances such as sand, soda, acids, chlorides or chemical solvents.
Stainless steel surfaces can be cleaned using a
Only use a mild solution of warm water and liquid dish soap to clean this appliance.
Do not use a steam cleaner to clean this appliance. Pressurized steam could penetrate electrical components and cause a short circuit.
Do not allow water to get into the electronic unit or lights.
Before cleaning
^Use the main switch to turn the appliance off completely.
The main switch is located on the right side underneath the control panel.
^Unplug the power cord.
^Remove any food from the appliance and store it in a cool place.
^Take out any removable parts, e.g., shelves.
Cleaning the interior and accessories
Use a mild solution of warm water and liquid dish soap. Wash all accessories and drawers by hand. Do not wash in a dishwasher.
^Clean the appliance as needed.
^After washing, wipe down the interior and accessories with a clean wet cloth, then dry with a soft cloth. Leave the appliance doors open for a short time, so the moisture can evaporate.
Appliance door
^Stainless steel surfaces can be cleaned using a
^To help prevent resoiling, a conditioner for stainless steel can also be used. Apply sparingly with even pressure.
29