Miele KF1901SF, KF1811SF, KF1801SF, KF1911SF installation instructions Anti-tip brackets

Page 61

Installing the appliance

Anti-tip brackets

The anti-tip brackets help keep the appliance safely secured to the installation niche to prevent tipping.

Two anti-tip brackets are recommended for each appliance or appliance combination (side-by-side).

The distance "D" between the anti-tip brackets b is the width of the appliance.

^Position the anti-tip brackets b on the left and right walls of the appliance niche.

^Mark the holes through the anti-tip brackets b on the floor of the installation niche.

^Set the brackets aside.

Assure that there are no electrical wires or plumbing in the area which the screws could penetrate-risk of injury and damage.

^Drill pilot holes:

1/8" (3 mm) for 5 x 60 mm wood screws

1/16" (2 mm) for 4 x 15 mm wood screws.

^Tightly secure the anti-tip brackets in the niche.

Be certain that the screws penetrate through the flooring and into the wall plate a minimum of 3/4" (19 mm).

61

Image 61
Contents En US, CA Contents Contents Electrical Safety Important Safety InstructionsUse InstallationDisposal of your old appliance Guide to the Fridge-Freezer combination Control panel Before use Before using for the first timeTurning the appliance On/Off Using the settings SettingsTurning the button sound On/Off Custom settingsFunction Display text Turning off for longer periods of time Temperature alarm AlarmDoor alarm Temperature range Setting the temperatureTemperature unit Fahrenheit/Celsius Using the SmartFresh drawers Storage temperaturesSmartFresh drawers HumidityFoods that are best stored under moist conditions Foods that are best stored under dry conditionsDifferent storage zones Using the refrigerator efficientlyWarmest area Coldest areaFreezing food Using the freezer efficientlyCooling drinks quickly DefrostingSwitching off SuperCool Switching on SuperCoolSuperCool SuperCoolTurning on the ice cube maker Ice cube makerTurning off the ice cube maker Refrigerator section and SmartFresh drawers Automatic defrostFreezer section Moving the shelves Adjusting the interior fittingsFloating drawer SmartFresh drawerReplacing the SmartFresh drawer Removing the storage shelf from above the drawer Adjusting the door shelvesRemoving a door shelf Replacing a door shelfSmall freezer basket Ice cube containerReplacing the ice cube container Replacing the small freezer basketReplacing the partition Large freezer basket with partitionReplacing the large freezer basket Before cleaning Cleaning and careCleaning the interior and accessories Appliance doorAluminum frames Humidity filtersVentilation slits After cleaningDoor seals Upper lighting Changing the light bulbSide lighting Water filter Exchanging the water filter Re-setting the filter indicator Deactivating the water filter Water Treatment Device Certificate Number Filter Performance Data SheetPerformance Data Sheet For Filter Model Frequently asked questions Door to ApplianceFreezer section will not OpenFlashing Alarm indicator isFilter display is red Filter display isIs not producing any Will not switch onIce cubes Ice cubes have SmallAn unpleasant Odor/flavorOr the ice cubes are Producing enough iceMisshapen Ice is formingClick Blubb, blubbSssrrrrr Rattling, vibratingMieleCare After sales servicePage Installation instructions Disposal of packing materials Caring for the environmentDisposal of an old appliance Installation site InstallationEmpty weight of your machine Base Installation nicheFurniture/fixtures VentilationSingle column Installation optionsSide-by-side Without partitionWith partition Side panelsNiche dimensions DimensionsDoor dimensions open min Tools needed for installation Installing the applianceBefore you begin OtherBefore installation Check the installation nicheRemoteVision module installation Preparing the installation niche Anti-tip brackets Securing an alternative anti-tip device Sliding the appliance into the installation niche Aligning the appliance Attaching the appliance to the installation niche Attaching the toe-kick panel Mounting the air separator Plumbing Preparing the water connection Connecting the water supply Electrical connection RemoteVision Accessing the RemoteVision control panel MasterCool control panel options for RemoteVision Status indicators Description of functionSelectable Description of function Options