Installing the appliance
Aligning the appliance
^Align the appliance with the custom front.
The
–Front: with an
The feet can be adjusted from the top and bottom e.
–Rear: with a 5/16" (8 mm) hex nut driver via flexible shaft f.
A mark is located on the appliance base and is used as a standard gauge for height adjustment. When adjusting the height, align this mark at 1 1/4"
(32 mm) above the floor.
^Unscrew the
reached the indicated guide dimension 1 1/4" (32 mm).
It is very important to comply with this dimension for the subsequent alignment of the custom door fronts.
^ Align the custom doors with a level. |
64