Troubleshooting

Please check the troubleshooting chart below. It includes several common problems, which you can correct at home, making a customer service call unnecessary.

Problem	Possible Cause	Remedy

	Unit is unplugged.	Plug the power cord into an outlet.

Unit does not dispense hot	Main power supply is off.	Reestablish main power supply.
and cold water.
and cold water.	The hose cap is not attached prop-	Connect properly. There will be a
	The hose cap is not attached prop-	Connect properly. There will be a
	erly to the connector on the water	give when the hose cap slides prop-
	cooler.	erly over the connector.
	The cold water thermostat is set at	Adjust the thermostat.
	too high a temperature.	Adjust the thermostat.
	too high a temperature.

	Over consumption of cold water in	Wait a moment for the water to cool.
	a short time.	Wait a moment for the water to cool.
Unit does not dispense	a short time.

	The ventilation around the unit is	Space the unit from the wall by more
cold water.	The ventilation around the unit is	Space the unit from the wall by more
cold water.	insufficient.	than 15 cm.
	insufficient.	than 15 cm.
	The temperature of water in the wa-
	ter bottle is too high. (When the	Place the water bottle in a cool loca-
	bottle is exposed to direct sunlight	tion out of direct sunlight.
	for a long time.)

Unit does not dispense hot	Over consumption of hot water in a	Wait a moment for the water to heat.
water.	short time.	Wait a moment for the water to heat.
water.	short time.

Unit is noisy during opera-	The appliance is not level.	Place the unit on a level, flat surface.
Unit is noisy during opera-
tion.
tion.	Unit is touching other objects.	Move the unit away from other ob-
		Move the unit away from other ob-
		jects.
		jects.
	The top portion of the faucet has	Tighten the top threaded portion of
	become loose.	the faucet.
Water leaks from the fau-	The faucet has been damaged.	Call the customer service telephone
cet.	The faucet has been damaged.	number to repair the faucet.
cet.		number to repair the faucet.

	The bottle may have small pin-	Replace with a new water bottle.
	holes.	Replace with a new water bottle.
	holes.
Water is dripping out of		Tighten the drain cap. If the sealing
Water is dripping out of	The drain cap on the back is not	silicon material inside the drain cap is
the water cooler and onto	The drain cap on the back is not	silicon material inside the drain cap is
the water cooler and onto	fastened properly.	torn or damaged, then replace with a
the floor.	fastened properly.	torn or damaged, then replace with a
the floor.		new one.
		new one.
	This is not uncommon with new	Clean the hose in the dishwasher (top
The water being dispensed	water coolers. Do not worry, this is	rack only) or let it soak in dish soap.
has a strange taste.	not dangerous to your health. This	The strange taste usually goes away
	water cooler is FDA approved.	after the first bottle has been used up.

WA2-02-50 specifications

The Soleus Air WA2-02-50 is a versatile and efficient air conditioning unit designed to provide optimal comfort in various environments. With its robust features and advanced technologies, this model stands out in the market for both residential and commercial use.

One of the primary features of the Soleus Air WA2-02-50 is its impressive cooling capacity. It boasts a cooling power of 12,000 BTUs, enabling it to effectively cool spaces up to 550 square feet. This makes it ideal for medium-sized rooms, such as living rooms, offices, or bedrooms, ensuring that users experience a comfortable atmosphere even during the hottest days.

The WA2-02-50 is also equipped with a dual-hose design, which enhances its efficiency by allowing for a faster cooling process. The dual-hose system works by drawing in air from outside for cooling while simultaneously venting hot air outside, resulting in reduced indoor pressure and more effective cooling. This not only improves performance but also helps to conserve energy, making it an eco-friendly choice.

Moreover, the unit features multiple cooling modes, including fan-only and dehumidification options. Users can select the appropriate mode based on their needs, making it a versatile option for year-round comfort. The dehumidification function is particularly useful in humid climates, effectively removing excess moisture from the air while maintaining a comfortable temperature.

Another key characteristic of the Soleus Air WA2-02-50 is its user-friendly design. The unit includes an easy-to-read LED display and a remote control, allowing users to adjust settings without having to get up. This is complemented by a programmable timer that enables users to set the unit to operate at specific times, ensuring energy savings and convenience.

In terms of maintenance, the WA2-02-50 is designed with a washable filter that helps to trap dust and allergens. This not only improves air quality but also extends the life of the unit. Regular maintenance is further simplified by the easy-access design for cleaning and servicing.

Overall, the Soleus Air WA2-02-50 combines power, efficiency, and convenience, making it a standout option for anyone in need of a reliable air conditioning solution. Its versatile features and advanced technologies make it suitable for various applications, ensuring that users can remain comfortable no matter the weather outside.