INSTALLATION, OPERATION AND CARE OF
HEAVY DUTY GAS GRIDDLES
GENERAL
Heavy Duty Gas Griddles are produced with quality workmanship and materials. Proper installation, usage and maintenance of your griddle will result in many years of satisfactory performance.
Thoroughly read this entire manual and carefully follow all of the instructions provided
Model | Number of Burners | BTU/hr Input Rating |
924RE, AGE24 | 2 | 60,000 |
|
|
|
936RE, AGE36 | 3 | 90,000 |
|
|
|
948RE, AGE48 | 4 | 120,000 |
|
|
|
960RE, AGE60 | 5 | 150,000 |
|
|
|
972RE, AGE72 | 6 | 180,000 |
|
|
|
INSTALLATION
Before installing, verify that the electrical service and type of gas supply (natural gas or propane) agree with the specifications on the rating plate located inside the griddle front panel. If the supply and equipment requirements do not agree, do not proceed with the installation. Contact your dealer immediately.
UNPACKING
This griddle was inspected before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of shipment. Check for possible shipping damage immediately after unpacking. If the griddle is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.
Carefully unpack your griddle and make sure that no parts are discarded with packaging material. A pressure regulator designed to operate with the griddle has been supplied and must be installed before the griddle is placed into service (Refer to GAS PRESSURE REGULATOR INSTALLATION in this manual).
- 3 -