REMOVABLEPARTS
CLEANING MATERIALS TO USE:
• Dishwashing detergent
•Warm water
*Soft cloth
MOLDED
RIB
_$PRING
CLIP
CLEAR GROOVE
IN STEM
TO REMOVE:
1.Be sure the control knob is in the off position.
2.Pull straight off the stem.
Using a piece of string can make removing the knob easier. Slip the string under and around the knob, pulling straight out.
TO CLEAN:
Wash the knob throughtly with soapy water. Dry completely with a soft cloth. DO NOT let the knob soak.
TO REPLACE:
1.Check the back of the knob. The molded rib
of the knob is designed to fit perfectly onto the knob stem.
2.Align the the molded rib to the clear groove in the knob stem.
3.Push the knob back as far as it will go.
light switch Is in the off
position. Do not touch a hot
_CAUTION: Be sure the oven light bulb with wet hands or a
wet cloth. Wait until the bulb has cooled and use a dry cloth. Never touch the live collar of the bulb. If you are replacing a broken light bulb, make sure the power supply is off.
GLASS
j._ECOLLAR
BULB
TO REPLACE:
1.Unscrew the light blub.
2.Replace the bulb with a 3 1/2" 40 watt appliance bulb.
14 | removable parts continued |