Schneider Electric ACRC501, ACRC500, ACRC502 Contacts, View the state of input and output contacts

Page 20

Contacts

View the state of input and output contacts

Path: Main > Configure Unit > Discrete I/O

Each cooling unit supports a user-defined input contact and a user-defined output contact. Each contact monitors a sensor and responds to changes in the state of the sensor (open or closed).

Input State: Indicates the actual state of the input contact (open or closed). A cooling unit is On when the state is normal and in Standby when the state is not normal.

Output State: Indicates the actual state of the output contact (open or closed). An alarm will cause the output contact to change from the normal state.

Edit the normal state of input and output contacts

Path: Main > Configure Unit > Discrete I/O > Normal State

You can set input contacts to cause alarm conditions based on a user-defined normal state. Output contacts can map internal alarms and events to outside devices.

Input Norm: Set the normal state of the contact (open or closed). The cooling unit changes its operating mode to Standby when the actual state differs from the normal state.

Output Norm: Set the normal state of the contact (open or closed). If the state of an alarm or event mapped to this contact changes from the normal state, the contact also changes state.

Output Src: Define the type of output alarm, either Any Alrm or Critical, that causes the output to change from its normal state.

14

InRow RC Operation and Maintenance Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Operation and Maintenance Manual 990-3237B-001 Publication Date NovemberSchneider Electric IT Corporation Legal Disclaimer Table of Contents Network Management Card Troubleshooting Page Important Safety Information General InformationSafety Notices During Operation Hazard of Electric SHOCK, EXPLOSION, or ARC FlashStatic Electricity Hazard Checklists Initial inspection checklistCommissioning Ensure thatElectrical inspection checklist Electrical HazardMechanical inspection checklist Piping InstallationUser interface inspection checklist Start-up inspection checklistFinal inspection checklist While the equipment is operating, ensure thatDescription Function OperationDisplay Interface Using the Display Scrolling status screensMain menu screens Navigating the main menuNavigating sub-menus Using the Path statementPath Main Set Password Change Passwords Password entry Path Main Operation Limit AccessStart the cooling unit Path Main On/StandbyStop the cooling unit Standby OptionPath Main Configure Unit General General ConfigurationCooling unit configuration Path Main Configure Unit Discrete I/O Path Main Configure Unit Discrete I/O Normal StateContacts View the state of input and output contactsPath Main Configure Group Cooling Group ConfigurationConfigure the cooling group Configure Modbus Path Main Configure ModbusIdentify the cooling unit Path Main Set IdentificationHow the Cool mode works Control the EnvironmentSetpoints Path Main Set Group SetpointsPID settings Path Main Set Group PIDsControl Method Proportional Integral Derivative Loop Behavior PID Tuning CorrectionTune the PID loop Thresholds Service intervalsRun hours Display Settings Password & timeoutAdjust display Date & timeDisplay units Path Main Menu Set Display UnitsPath Main Configure Network Network ConfigurationConfigure the network Path Main View Unit Status View Status ReadingsCooling unit status Cooling group status About the cooling unitPath Main View Group Status Path Main About InRow RCEvent Log View event logClear event log Path Main View Event LogRespond to Alarms View active alarmsClear active alarms Alarm messages and suggested actionsConfigure Unit General Role Override Auto and that cooling Threshlds screenAlarm Message Severity Action Required Quick Configuration TCP/IP configuration methodsSchneider Electric Device IP Configuration Wizard Network Management CardIni file utility Bootp & Dhcp configuration Network TCP/IP Boot Mode Dhcp only Advanced Dhcp Cookie Is Local access to the control consoleRemote access to the control console Control console Choose Network from the Control Console menuTelnet and SSH Access a Configured Network Management CardWeb interface Simple Network Management Protocol Snmp ModbusInRow RC Operation and Maintenance Manual Recover From a Lost Password Maintenance Monthly Preventive MaintenanceCleanliness EnvironmentMechanical ElectricalSemi-Annual Preventive Maintenance FunctionalTroubleshooting Problem Possible Cause Corrective ActionProblem Possible Cause Corrective Action Page Page Worldwide Customer Support

ACRC501, ACRC502, ACRC500 specifications

Schneider Electric, a global leader in energy management and automation, has introduced its sophisticated line of edge computing solutions, namely the ACRC500, ACRC501, and ACRC502. These models are designed specifically to meet the increasing demand for efficient and reliable edge computing environments across various industries.

The ACRC500 serves as a compact and versatile solution that caters to small to medium-sized applications. It is engineered to optimize performance by utilizing advanced thermal management technologies. With a scalable architecture, the ACRC500 can easily be adapted for diverse workloads, making it ideal for facilities requiring quick deployment and efficient operation.

Meanwhile, the ACRC501 provides enhanced performance capabilities with increased processing power and memory. This model incorporates state-of-the-art technologies such as edge analytics and artificial intelligence, allowing businesses to make data-driven decisions in real time. Its robust design ensures it can withstand harsh environmental conditions, making it suitable for industrial settings. The ACRC501 also features advanced security protocols, ensuring sensitive data is safeguarded against potential cyber threats.

The ACRC502 stands out with its focus on high-density applications, offering improved data handling and processing efficiency. This model supports a wide range of connectivity options including Wi-Fi, Ethernet, and cellular networks, ensuring seamless integration into existing infrastructure. Its modular design allows for easy upgrades and scalability, making it a future-proof investment for enterprises looking to expand their edge computing capabilities.

All three models—ACRC500, ACRC501, and ACRC502—are built on Schneider Electric's EcoStruxure platform. This innovation enables real-time monitoring and analytics, facilitating proactive maintenance and reducing downtime. Furthermore, they support IoT applications, making them ideal for smart factory implementations, healthcare analytics, and energy management systems.

In addition to their high-performance features, these edge computing solutions are designed with sustainability in mind. Schneider Electric emphasizes energy efficiency and reduced carbon footprints in their development processes, aligning with global sustainability goals. The result is a suite of products that not only enhance operational efficiency but also contribute to a more sustainable future for businesses.

In conclusion, the ACRC500, ACRC501, and ACRC502 represent Schneider Electric's commitment to innovation in edge computing. With their array of features and technologies, these models are poised to meet the evolving needs of industries across the globe, driving the future of operational efficiency and sustainability.
Top Page Image Contents