Schneider Electric ACRC501, ACRC500, ACRC502 manual Network Configuration, Configure the network

Page 29

Network Configuration

The cooling unit is shipped with a Network Management Card (NMC) that enables you to manage the cooling unit over your network. Configure the network settings for the Network Management Card from the display interface. The management card allows remote control and configuration of the cooling unit.

Configure the network

Path: Main > Configure Network

MAC Address: Displays the unique network identifier assigned to the Network Management Card of the cooling unit installed in the cooling unit at the factory.

IP Address: You will be prompted to enter an Admin password. Enter the password and press ENTER to return to the IP screen. Press ENTER again to change the following settings for Manual boot mode only.

•IP: Enter the IP address assigned to the Network Management Card of the cooling unit.

•SM: Enter the subnet mask for the Network Management Card of the cooling unit.

•GW: Enter the default gateway for the Network Management Card of the cooling unit.

Boot Mode: Set the method by which the Network Management Card of the cooling unit will acquire its network settings.

•Manual: Enter the IP Address, subnet mask, and default gateway using the IP Address menu.

•BOOTP: Set the Network Management Card of the cooling unit to obtain its network settings from a BOOTP server.

•DHCP: Set the Network Management Card of the cooling unit to obtain its network settings from a DHCP server.

By default, DHCP requires an Schneider Electric cookie before it will accept an IP address. See “DHCP:” on page 32 for more information.

•BOOTPDHCP: Set the Network Management Card of the cooling unit to search for its network settings from either a BOOTP or a DHCP server.

InRow RC Operation and Maintenance Manual

23

Page 28 Page 30
Image 29
Page 28 Page 30
Contents 990-3237B-001 Publication Date November Operation and Maintenance ManualSchneider Electric IT Corporation Legal Disclaimer Table of Contents Network Management Card Troubleshooting Page General Information Important Safety InformationHazard of Electric SHOCK, EXPLOSION, or ARC Flash Safety Notices During OperationStatic Electricity Hazard Initial inspection checklist ChecklistsCommissioning Ensure thatElectrical Hazard Electrical inspection checklistPiping Installation Mechanical inspection checklistStart-up inspection checklist User interface inspection checklistFinal inspection checklist While the equipment is operating, ensure thatDescription Function OperationDisplay Interface Scrolling status screens Using the DisplayMain menu screens Navigating the main menuNavigating sub-menus Using the Path statementPath Main Set Password Change Passwords Path Main Operation Limit Access Password entryStart the cooling unit Path Main On/StandbyStandby Option Stop the cooling unitPath Main Configure Unit General General ConfigurationCooling unit configuration Path Main Configure Unit Discrete I/O Normal State Path Main Configure Unit Discrete I/OContacts View the state of input and output contactsPath Main Configure Group Cooling Group ConfigurationConfigure the cooling group Path Main Configure Modbus Configure ModbusIdentify the cooling unit Path Main Set IdentificationControl the Environment How the Cool mode worksSetpoints Path Main Set Group SetpointsPath Main Set Group PIDs PID settingsControl Method Proportional Integral Derivative Loop Behavior PID Tuning CorrectionTune the PID loop Thresholds Service intervalsRun hours Password & timeout Display SettingsAdjust display Date & timePath Main Menu Set Display Units Display unitsPath Main Configure Network Network ConfigurationConfigure the network Path Main View Unit Status View Status ReadingsCooling unit status About the cooling unit Cooling group statusPath Main View Group Status Path Main About InRow RCView event log Event LogClear event log Path Main View Event LogView active alarms Respond to AlarmsClear active alarms Alarm messages and suggested actionsThreshlds screen Configure Unit General Role Override Auto and that coolingAlarm Message Severity Action Required TCP/IP configuration methods Quick ConfigurationSchneider Electric Device IP Configuration Wizard Network Management CardIni file utility Bootp & Dhcp configuration Network TCP/IP Boot Mode Dhcp only Advanced Dhcp Cookie Is Local access to the control consoleRemote access to the control console Choose Network from the Control Console menu Control consoleTelnet and SSH Access a Configured Network Management CardWeb interface Modbus Simple Network Management Protocol SnmpInRow RC Operation and Maintenance Manual Recover From a Lost Password Monthly Preventive Maintenance MaintenanceCleanliness EnvironmentElectrical MechanicalFunctional Semi-Annual Preventive MaintenanceProblem Possible Cause Corrective Action TroubleshootingProblem Possible Cause Corrective Action Page Page Worldwide Customer Support

ACRC501, ACRC502, ACRC500 specifications

Schneider Electric, a global leader in energy management and automation, has introduced its sophisticated line of edge computing solutions, namely the ACRC500, ACRC501, and ACRC502. These models are designed specifically to meet the increasing demand for efficient and reliable edge computing environments across various industries.

The ACRC500 serves as a compact and versatile solution that caters to small to medium-sized applications. It is engineered to optimize performance by utilizing advanced thermal management technologies. With a scalable architecture, the ACRC500 can easily be adapted for diverse workloads, making it ideal for facilities requiring quick deployment and efficient operation.

Meanwhile, the ACRC501 provides enhanced performance capabilities with increased processing power and memory. This model incorporates state-of-the-art technologies such as edge analytics and artificial intelligence, allowing businesses to make data-driven decisions in real time. Its robust design ensures it can withstand harsh environmental conditions, making it suitable for industrial settings. The ACRC501 also features advanced security protocols, ensuring sensitive data is safeguarded against potential cyber threats.

The ACRC502 stands out with its focus on high-density applications, offering improved data handling and processing efficiency. This model supports a wide range of connectivity options including Wi-Fi, Ethernet, and cellular networks, ensuring seamless integration into existing infrastructure. Its modular design allows for easy upgrades and scalability, making it a future-proof investment for enterprises looking to expand their edge computing capabilities.

All three models—ACRC500, ACRC501, and ACRC502—are built on Schneider Electric's EcoStruxure platform. This innovation enables real-time monitoring and analytics, facilitating proactive maintenance and reducing downtime. Furthermore, they support IoT applications, making them ideal for smart factory implementations, healthcare analytics, and energy management systems.

In addition to their high-performance features, these edge computing solutions are designed with sustainability in mind. Schneider Electric emphasizes energy efficiency and reduced carbon footprints in their development processes, aligning with global sustainability goals. The result is a suite of products that not only enhance operational efficiency but also contribute to a more sustainable future for businesses.

In conclusion, the ACRC500, ACRC501, and ACRC502 represent Schneider Electric's commitment to innovation in edge computing. With their array of features and technologies, these models are poised to meet the evolving needs of industries across the globe, driving the future of operational efficiency and sustainability.
Top Page Image Contents