Nortel Networks NN10029-111 manual Configuration window top half

42 Configuration Nortel Networks Confidential

an example with the name SIPApp entered in the Service Component Name field.

Figure 5 Configuration window (top half)

5

ATTENTION

DO NOT click on Apply until you have FINISHED filling in the fields that you need.

Note that there are a number of different tabs in the SIP Application Module configuration window representing the configurable services that the SIP Application Module requires. The following sections describe each tab in detail and provide guidance on how to configure the SIP Application Module. Many of the fields are already filled with default values. Administrators can leave most of the filled-in fields with their default values. Only a few fields need customization.

Note: The parameters with asterisks (*) are mandatory. The grayed-out fields are for information only and cannot be changed.

Make any required modifications to any of the tabs. When you have COMPLETED all the tabs, click on the Apply button.

6After you click the Apply button, the Management Module begins the deployment and installation of the SIP Application

NN10029-111 Standard MCP 1.1 FP1 (02.02) April 2003 Copyright © 2003, Nortel Networks