90 Configuration | Nortel Networks Confidential |
|
|
Additional SIP TCF Base tab configuration information
This section contains additional configuration information for the IP and port properties under the SIP TCF Base tab.
TCF Config details
SIP server protocol, network, and ports are started based on the information in this parameter. The TCF Config syntax for this parameter follows:
<transport>=<host address>:<host port>:<optional parameters>
You can define multiple transports by continuing this format with a semicolon separator.
The supported transports for SIP are UDP, TCP, and SSL. The format of the optional parameter in the configuration string is specific to each supported transport type and, for some transports, configuration information in the optional parameter is mandatory.
For TCF Config parameter values, refer to Table 26, “UDP/TCP/SSL Config values.”
Table 26 UDP/TCP/SSL Config values
Parameter | Value | Description |
|
|
|
Host Address | IP v4 address | This field contains the address of the |
|
| host on which you want the |
|
| connection to open. |
Host Port | Integer | This field contains the port on which |
|
| to open the connection. The standard |
|
| port for SIP is 5050. |
Optional | hostaddr:<IPv4> | The hostaddr value specifies the |
|
| primary public address of the SIP |
|
| Application Module. |
|
|
|
TCF Config parameter example 1, UDP, TCP
Example
UDP=192.168.0.1:5060;TCP=192.168.0.1:5060
Note: Do not use the IP addresses from this example in your network.
Copyright © 2003, Nortel Networks |
