Nortel Networks Confidential |
| Configuration 87 |
| ||
Table 25 Transport Management tab subfield descriptions, continued | ||
|
|
|
Field | Value | Description |
|
|
|
D | Type=checkbox | Use this checkbox when you |
| Default=unchecked | want to delete a checkbox’s |
|
| relevant section, indicated by |
|
| the bracket in the figure |
|
| above. |
Interface Configuration: | Type=checkbox | Check the box if this |
Transport Enabled | Default=checked | Transport is enabled. |
Interface Configuration: | Type=string | This is the protocol this |
Protocol | Default=SIP | interface supports. |
Interface Configuration: | Type=string | This is the transport for this |
Transport | Range=TCP or UDP | interface. |
| Default=UDP |
|
Interface Configuration: | Type=string | This is the service IP |
Address | address label. | |
| Default=Private_Service |
|
| _Address, Public_ |
|
| Service_Address |
|
Interface Configuration: | Type=string | This is the port for this |
Port | interface. The range is 1024 | |
| numbers | to 65535. |
| Default=5060 |
|
Interface Configuration: | Type=string | These are the optional |
Params | Default=name=sipLscCo | parameters for this interface. |
| nduit:interface=qfe0 |
|
Note: Scroll down to repeat entries in these subfields as needed.
Transport Management:
The Transport Manager (referred to as the reliability managed object) is responsible for the heartbeat communication and state maintenance between the Application Modules. This software is responsible for monitoring the health and communicating the status of a Network Service Descriptor (NSD) across servers. Status communication and heartbeating occurs across all provisioned interfaces.
The heartbeat data in the Transport Manager defines a server group. Each server in a group includes provisioning for the static public and private address of every other server in that group. Each server in a
Copyright © 2003, Nortel Networks | MCP SIP Application Module Basics |
