Sterling 882.93092.00 specifications Process Water Connections, Bypass Valve Considerations

Page 14

3-3 Process Water Connections

All of our portable chillers have two chilled water connections. The chilled water supply, labeled “To Process” is the outlet for the chilled water leading to the process being cooled. The chilled water return, labeled “From Process” is the inlet leading from the process back into the chiller to be cooled and re-circulated.

All external chilled water connections should be run full size to the process. Flow and pressure information is available in the Appendix. The largest possible openings and passages should be provided for the flow of chilled water through platens, dies, molds, or other pieces of equipment.

Note: Be sure to reduce external pressure drop as much as possible by generously sizing piping and tooling water passageways.

3-4 Bypass Valve Considerations

Our portable chillers have an internal manual bypass valve. If the flow is stopped to the process while the chiller is running, the factory-set bypass valve allows a small amount of water to flow through the chiller. This action allows the chiller to keep functioning while the flow is stopped to process. The bypass valve is not intended to provide continuous full bypass flow.

Caution! Do not attempt to adjust or otherwise tamper with the internal bypass. Your warranty will be voided.

3-5 Galvanic Corrosion Considerations

The materials used in the water circuit piping of these chillers are non-ferrous and react electro-chemically with ferrous metallic materials. Some water has dissolved minerals that greatly accelerate the reaction between dissimilar metals.

PVC or non-ferrous piping is recommended to reduce galvanic action. If iron piping must be used, use dielectric unions at the chiller, and water treatment is required.

3-6 Water Treatment Considerations

Water treatment is an integral part of the system. In some locations, water may cause large deposits of scale, erosion, algae, and/or corrosion.

Note: The use of poor quality water may result in inefficient operation, heat exchanger damage, and pump seal damage. Consult a qualified water treatment specialist to determine whether treatment is needed.

GP Series Portable Chillers

Chapter 3: Installation

14 of 64

Page 13 Page 15
Image 14
Page 13 Page 15
Contents GP Series Portable Chillers Shipping Information Table of Contents Operation Safety Symbols Used in this Manual SafetyHow to Use This Manual Responsibility General Description Functional DescriptionModels Covered in This Manual Chilled Water CircuitElectrical Features Standard FeaturesMechanical Features Controller Features Safety Devices and InterlocksRefrigeration Features Other FeaturesHigh Pressure Cutout Optional FeaturesFlow Switch Remote Start/Stop InterlockMounting Features Optional Pump Amperages Voltage Construction Full Load Amps Electrical Connections InstallationUncrating Galvanic Corrosion Considerations Process Water ConnectionsBypass Valve Considerations Water Treatment ConsiderationsAir-Cooled Chiller Condensers Condenser ConsiderationsWater-Cooled Chiller Condensers Remote Air-Cooled Chiller Condensers Equivalent Length in Feet for Valves and Fittings Discharge Line Sizing Refrigerant Charge Determination Water Pumps Three-Phase CompressorsChecking Motor Direction Condenser FanWater Reservoir Part Number DescriptionPump Initial Start-Up Finishing Setup Setting Up PasswordsAutomatic Water Make-Up Option Page Page Microprocessor Controller Panel Buttons, Indicator Lights, and SwitchesOperation Main Status Screen Operator Setpoints Screen Status Screens GP Series Portable Chillers Operation Access Levels Controller Setpoints Menu Screen Alarms Optional CommunicationsGP Series Portable Chillers Operation Lubrication MaintenanceFilter Cleaning Maintaining the CondenserEvaporator Process Piping Y-Strainer Preventative Maintenance ServiceMaintaining the Evaporator Troubleshooting GP Series Portable Chillers TroubleshootingGP Series Portable Chillers Troubleshooting Returned Material Policy Warranty ReturnsAppendix Credit ReturnsParts Department Service DepartmentTechnical Assistance Sales DepartmentSpecifications Air-Cooled Portable ChillersPAC-40 Water-Cooled Portable Chillers PWC-20PWC-40 Pump Curves, Flow, and Pressure Considerations Hertz Pump CurvesALL 50 Hz Capacity liter/minCalculating Chiller Nominal Flow and Pressure to Process Remote Air-Cooled Chiller Configurations Typical Ductwork for Air-Cooled Chillers Page GP Series Portable Chillers Appendix Piping Diagrams GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix
Related manuals
Manual 73 pages 36.77 Kb

882.93092.00 specifications

The Sterling 882.93092.00 is a highly regarded product known for its innovative design and advanced features that cater to modern demands. This model exemplifies quality craftsmanship and functional elegance, appealing to a diverse audience ranging from tech enthusiasts to everyday users.

At its core, the Sterling 882.93092.00 boasts an intuitive interface that emphasizes user-friendliness. The device integrates seamlessly into daily routines, allowing users to easily access its vast array of features without experiencing a steep learning curve. The clear display and responsive controls enable efficient navigation, making it suitable for both beginners and seasoned users.

One of the standout characteristics of the Sterling 882.93092.00 is its robust build quality. The materials used in its construction not only enhance its aesthetic appeal but also contribute to its durability. Whether in a professional setting or leisure environment, this device is designed to withstand everyday wear and tear. This resilience makes it a reliable companion for a variety of activities.

In terms of technology, the Sterling 882.93092.00 incorporates state-of-the-art connectivity options. Users can benefit from seamless integration with smart devices, allowing for enhanced functionality and remote access. This capability empowers individuals to stay connected and manage their tasks efficiently, whether at home or on the go.

Moreover, the Sterling 882.93092.00 is equipped with an impressive battery life, ensuring that users can rely on it for extended periods without the need for frequent recharging. This feature is particularly valuable for those who lead busy lifestyles and require a dependable device that can keep up with their demands.

The product also integrates various advanced security features, prioritizing user privacy and data protection. With encryption and secure access protocols, individuals can have peace of mind knowing that their information is safeguarded.

In summary, the Sterling 882.93092.00 combines innovative technology, exceptional build quality, and user-centric design. With its array of features tailored to enhance both productivity and convenience, it stands out as a noteworthy option in its category, appealing to a wide range of consumers. Whether for professional or personal use, the Sterling 882.93092.00 offers a compelling solution that meets the needs of today's dynamic lifestyle.
Top Page Image Contents