Sterling 882.93092.00 specifications Condenser Considerations, Water-Cooled Chiller Condensers

Page 15

3-7 Condenser Considerations

Water-Cooled Chiller Condensers

Water-cooled portable chillers can use city water or tower water as a cooling medium. Make sure that all external piping and connections supplying and discharging water to and from the condenser are full size.

You’ll make two connections to the water-cooled condenser:

Condenser Water In. The condenser water supply, labeled “Condenser Water In”, is located at the rear of the chiller. It is the inlet for city or tower water.

Make sure that water is supplied at a maximum temperature of 85ºF (29ºC) and a minimum pressure of 25 psi.

Caution! The electronic water-regulating valves pressure setpoint is set at the factory. Only a qualified refrigeration technician should adjust the pressure setting. Please contact our service group at 800-423-3183 to schedule an appointment.

Normal HFC-410a refrigerant condensing pressure is 342 psi (2,360 kPa), with 85ºF (27ºC) water at 25 psi entering condenser water pressure

Condenser Water Out. Condenser water return, labeled “Condenser Water Out”, is located at the rear of the chiller. It is the outlet for water after it has passed through the condenser.

It is connected to the tower water return line or to a sewer or other approved discharge receiver. A water-regulating valve is a standard feature in the condenser water out line.

Air-Cooled Chiller Condensers

Air-cooled chillers use the surrounding air to cool the condenser. Install the chiller in an area where there is free passage of air for condensing and provisions for removal of heated air from the area. Do not locate air-cooled chillers in locations where steam, hot air, or fume exhausts can be drawn into the chiller.

Caution! Clean air-cooled condensers and filters frequently. Failure to do so results in reduced capacity, increased operating costs, and possible failure of the equipment. Cleaning instructions can be found in the Maintenance chapter of this manual

Normal maximum refrigerant condensing pressure with 95ºF (35ºC) air entering the condenser is 420 psi (2896 kPa).

Condensing Air Temperature. Our air-cooled portable chillers are designed to operate at a minimum condenser entering air temperature of approximately 60ºF (15.5ºC). Operation of the equipment at a lower condenser entering air temperature can cause the chiller to malfunction. For entering air temperatures below 60ºF (15.5°C), an optional fan motor speed control is available. We recommend maintaining a minimum 60ºF (15.5°C) ambient temperature.

GP Series Portable Chillers

Chapter 3: Installation

15 of 64

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GP Series Portable Chillers Shipping Information Table of Contents Operation Safety How to Use This ManualSafety Symbols Used in this Manual Responsibility Chilled Water Circuit Functional DescriptionModels Covered in This Manual General DescriptionStandard Features Mechanical FeaturesElectrical Features Other Features Safety Devices and InterlocksRefrigeration Features Controller FeaturesRemote Start/Stop Interlock Optional FeaturesFlow Switch High Pressure CutoutMounting Features Optional Pump Amperages Voltage Construction Full Load Amps Installation UncratingElectrical Connections Water Treatment Considerations Process Water ConnectionsBypass Valve Considerations Galvanic Corrosion ConsiderationsCondenser Considerations Water-Cooled Chiller CondensersAir-Cooled Chiller Condensers Remote Air-Cooled Chiller Condensers Equivalent Length in Feet for Valves and Fittings Discharge Line Sizing Refrigerant Charge Determination Condenser Fan Three-Phase CompressorsChecking Motor Direction Water PumpsPart Number Description Water ReservoirPump Finishing Setup Setting Up Passwords Automatic Water Make-Up OptionInitial Start-Up Page Page Panel Buttons, Indicator Lights, and Switches OperationMicroprocessor Controller Main Status Screen Operator Setpoints Screen Status Screens GP Series Portable Chillers Operation Access Levels Controller Setpoints Menu Screen Optional Communications AlarmsGP Series Portable Chillers Operation Maintaining the Condenser MaintenanceFilter Cleaning LubricationPreventative Maintenance Service Maintaining the EvaporatorEvaporator Process Piping Y-Strainer GP Series Portable Chillers Troubleshooting TroubleshootingGP Series Portable Chillers Troubleshooting Credit Returns Warranty ReturnsAppendix Returned Material PolicySales Department Service DepartmentTechnical Assistance Parts DepartmentAir-Cooled Portable Chillers SpecificationsPAC-40 PWC-20 Water-Cooled Portable ChillersPWC-40 Hertz Pump Curves Pump Curves, Flow, and Pressure ConsiderationsCapacity liter/min ALL 50 HzCalculating Chiller Nominal Flow and Pressure to Process Remote Air-Cooled Chiller Configurations Typical Ductwork for Air-Cooled Chillers Page GP Series Portable Chillers Appendix Piping Diagrams GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix GP Series Portable Chillers Appendix
Related manuals
Manual 73 pages 36.77 Kb

882.93092.00 specifications

The Sterling 882.93092.00 is a highly regarded product known for its innovative design and advanced features that cater to modern demands. This model exemplifies quality craftsmanship and functional elegance, appealing to a diverse audience ranging from tech enthusiasts to everyday users.

At its core, the Sterling 882.93092.00 boasts an intuitive interface that emphasizes user-friendliness. The device integrates seamlessly into daily routines, allowing users to easily access its vast array of features without experiencing a steep learning curve. The clear display and responsive controls enable efficient navigation, making it suitable for both beginners and seasoned users.

One of the standout characteristics of the Sterling 882.93092.00 is its robust build quality. The materials used in its construction not only enhance its aesthetic appeal but also contribute to its durability. Whether in a professional setting or leisure environment, this device is designed to withstand everyday wear and tear. This resilience makes it a reliable companion for a variety of activities.

In terms of technology, the Sterling 882.93092.00 incorporates state-of-the-art connectivity options. Users can benefit from seamless integration with smart devices, allowing for enhanced functionality and remote access. This capability empowers individuals to stay connected and manage their tasks efficiently, whether at home or on the go.

Moreover, the Sterling 882.93092.00 is equipped with an impressive battery life, ensuring that users can rely on it for extended periods without the need for frequent recharging. This feature is particularly valuable for those who lead busy lifestyles and require a dependable device that can keep up with their demands.

The product also integrates various advanced security features, prioritizing user privacy and data protection. With encryption and secure access protocols, individuals can have peace of mind knowing that their information is safeguarded.

In summary, the Sterling 882.93092.00 combines innovative technology, exceptional build quality, and user-centric design. With its array of features tailored to enhance both productivity and convenience, it stands out as a noteworthy option in its category, appealing to a wide range of consumers. Whether for professional or personal use, the Sterling 882.93092.00 offers a compelling solution that meets the needs of today's dynamic lifestyle.
Top Page Image Contents