Miele KWL 4612 S, KWL 4812 S installation instructions Defrosting

Page 17

Defrosting

Condensate and frost can build up on the back wall of the appliance whilst it is in use. These are automatically removed and defrosted by the appliance.

The condensate is drained away via a channel and drain hole into an evaporation system at the back of the appliance.

Ensure that the condensate channel and drain hole are never blocked so that condensate can flow away without hindrance.

Image 17

Contents Page Contents Contents Description of the appliance Description of the appliance Disposal of your old appliance Caring for the environmentDisposal of the packing material Correct usage Technical safetyUse Disposal of your old appliance Normal energy Increased energy Consumption How to save energyOperation Temperature Correct temperature and humiditySafety features Setting the temperatureTemperature range Temperature displayTemperature display will flash, if Temperature display brightnessCorrect temperature and humidity Wooden shelves Storing wine bottlesDescriptive labels Maximum capacitySwitching on the alarm system AlarmTemperature alarm Door alarmDefrosting Before cleaning Cleaning and careCleaning the outer casing, the interior and accessories ClothDoor seal After cleaningMetal grille at the back of the appliance Active charcoal filterProblem solving guide Interior light is not working Normal noises What causes them NoisesService Department Electrical connection U.K Non-rewireable plugs BSElectrical connection Installation InstallationLocation VentilationChanging over the door Changing the door hingingRemoving the door handle Refitting the handle Changing the door hinging Page Page Page Alteration rights reserved