Miele KWL 4812 S, KWL 4612 S Electrical connection U.K, Non-rewireable plugs BS

Page 24

Electrical connection

Electrical connection U.K.

All electrical work should be carried out by a suitably qualified and competent person in accordance with local and national safety regulations.

The appliance is supplied with a mains cable and moulded plug ready for connection to an a.c. single phase 220-240 V 50 Hz supply.

The voltage and connected load are given on the data plate. Please ensure that these match the household mains supply. The fuse rating is quoted on the plug.

Connection should be made via a suitable switched socket which is easily accessible. For extra safety it is advisable to install a residual current device (RCD) with a trip current of 30 mA (in accordance with DIN VDE 0664, VDE 0100, Section 739).

Do not connect the appliance to the mains electricity supply by an extension lead. Extension leads do not guarantee the required safety of the appliance (e.g. danger of overheating).

The appliance must not be connected to an inverter and must not be used with a plug adapter as these can cause damage to the appliance's electronic unit.

Non-rewireable plugs (BS 1363)

The fuse cover must be re-fitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained. The colour of the correct replacement cover is that of the coloured insert in the base of the plug, or the colour that is embossed in words in the base of the plug (as applicable to the design of the plug fitted).

Replacement fuses should be ASTA approved to BS 1362 and have the correct rating. Replacement fuses and fuse covers may be purchased from your local electrical supplier.

WARNING

THIS APPLIANCE MUST BE

EARTHED

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Page Contents Contents Description of the appliance Description of the appliance Caring for the environment Disposal of the packing materialDisposal of your old appliance Technical safety Correct usageUse Disposal of your old appliance How to save energy Normal energy Increased energy ConsumptionOperation Correct temperature and humidity TemperatureSafety features Setting the temperatureTemperature display Temperature rangeTemperature display will flash, if Temperature display brightnessCorrect temperature and humidity Storing wine bottles Wooden shelvesDescriptive labels Maximum capacityAlarm Switching on the alarm systemTemperature alarm Door alarmDefrosting Cleaning and care Before cleaningCleaning the outer casing, the interior and accessories ClothAfter cleaning Door sealMetal grille at the back of the appliance Active charcoal filterProblem solving guide Interior light is not working Noises Normal noises What causes themService Department Non-rewireable plugs BS Electrical connectionElectrical connection U.K Installation InstallationLocation VentilationChanging the door hinging Removing the door handleChanging over the door Refitting the handle Changing the door hinging Page Page Page Alteration rights reserved
Top Page Image Contents