Changing the door hinging
^Rotate the door 180°.
^Remove cover f and use it to cover the now empty holes on the opposite side.
^Hang the door on the upper hinge pin and close the door.
^Fit the hinge bracket in the lower door bearing. Then screw it securely to the appliance plinth.
Use the long slots in the hinge bracket to align the door.
Refitting the handle:
Please make sure you follow the instructions below carefully when you refit the handle. The door seal will be damaged if the handle is fitted incorrectly.
^Loosely attach the handle to the opposite side of the door with the two front screws b.
Mounting plate c must be positioned on the side of the door so that when the door is closed it is flush with the side of the appliance.
If this is not the case,
^Tighten both grub screws a with the allen key provided until mounting plate c lines up correctly.
^Then tighten all 4 fixing screws b.
^Slide the side section of the handle d into the guides on the mounting plate until it clicks into place.
27