SECTION 6: OPERATIONS
General |
| Power Switch |
|
|
|
This section covers basic sanding operations. Please read the remaining portion of the manual before attempting any type of operation.
Your safety is important! Please follow the warnings below during this entire section:
Damage to your eyes, lungs, and ears could result from failure to wear safety glasses, a respirator, and hearing protec- tion while sanding with this machine.
Loose hair and clothing could get caught in machinery and cause serious personal injury. Keep loose clothing rolled up and long hair tied up and away from machinery.
Operating this equipment has the potential to propel debris into the air which can cause eye injury. Always wear safety glass- es or goggles when operating equipment. Everyday glasses or reading glasses only have impact resistant lenses, they are not safety glasses. Be certain the safety glass- es you wear meet the appropriate stan- dards of the American National Standards Institute (ANSI).
The Model G0547 Combo Sander is equipped with a
Make sure the power switch is in the OFF position before connecting the sander to the power source. Serious personal injury could occur if you connect your machine to the power source with the power switch on.
To operate the power switch:
1.Plug in the sander and insert the safety lock- ing key shown in Figure 16.
