Sharp AR-FX12 To USE this Product Correctly AS a Facsimile, Line connection, Fax power switch

Fax power switch

Adapter

TO USE THIS PRODUCT CORRECTLY AS A FACSIMILE

Several points must be kept in mind when using this product as a facsimile.

Please note the following:

Line connection Line socket

Use the telephone cable supplied to connect the machine to a telephone line. Insert the end of the line cord with the core into the LINE socket on the machine as shown. Insert the other end into the telephone line socket.

In some countries, an adapter is required to connect the telephone line cable to the wall telephone socket, as shown in the illustration.

Core

For United	Wall socket
Kingdom

For Australia

For New Zealand

Fax power switch

When using the machine, be sure to keep the fax power switch turned on at all times. The fax power switch must be turned on to receive faxes at night or send timer transmission faxes at night.

Setting the date and time and programming your sender's name and number

ON

OFF

Before using the fax function, you must set the date and time and program your sender's name and number in the machine.

This procedure is explained in "POINTS TO CHECK AND PROGRAM AFTER INSTALLATION" on page 1-2of this manual.

Lithium battery

A lithium battery inside the machine keeps key operator program settings for the fax function in memory. When the battery dies, key operator program settings will be lost. Be sure to keep a written record of the key operator program settings.

The life of the lithium battery is approximately 5 years if the machine power switch and fax power switch are kept continually off.

Other information

If a thunderstorm occurs, we recommend that you unplug the power cord from the power outlet. Information will be retained in memory even if the power cord is unplugged.

0-4