Sharp AR-FX12 Using the KEY Operator Programs, Touchkey. the KEY Operator Programs

KEY OPERATOR PROGRAMS

USING THE KEY OPERATOR PROGRAMS

Follow these steps to configure the settings in the key operator programs.

1 Press the [CUSTOM SETTINGS] key.

4 Touch the [IMAGE SEND SETTINGS] key.

CONTROL	CONTROL
DEVICE CONTROL	COPY SETTINGS
IMAGE SEND	DOC. FILING
SETTINGS	SETTING

2 Touchkey. the [KEY OPERATOR PROGRAMS]

DEFAULT	LIST PRINT
SETTINGS

5 Touch the [OPERATION SETTINGS] key or the [FAX SETTINGS] key to display the key operator programs.

E SEND SETTINGS

SENDER CONTROL

FAX DATA

RECEIVE/FORWA

OPERATION SETTINGS

FAX SETTINGS

KEY OPERATOR PROGRAMS

I-FAX SETTINGS

3 Use the numeric keys to enter the five-digit key operator code number.

	For	the	factory default
	setting		for	the key
	operator		code	number,
KEY OPERATOR CODE
	see	page 2 of the key

6 Select the desired program and configure the setting.

Page 8-2shows the programs that can be selected. The settings for each of the programs are explained on the following pages.

operator's guide.

7 Press the [CA] key to exit the program.

Supplementary explanation of key operation for key operator programs

A

B

KEY OPERATOR PROGRAMS

OPERATION SETTINGS

DEFAULT DISPLAY SETTINGS

MUST INPUT NEXT ADDRESS KEY AT BROADCAST SETTING

INITIAL RESOLUTION SETTING

THE NUMBER OF DIRECT ADDRESS/ SENDER KEYS DISPLAYED SETTING

THE NUMBER OF FILE NAME/

SUBJECT KEYS DISPLAYED SETTING

6

6

These keys and indicator are available on setting screens that require the entry of numerical values.

OK		15	(1 15)
	1/2

C

8

D E

AThe name of the program category or particular item to be set will appear on the touch key. The displayed item is selected by touching the key.

BCheck mark boxes are touch keys that show the status of selections. A box with a check mark means the function is "on" (enabled) and an unchecked box means the function is "off" (disabled). The on/off status changes each time the box is touched.

CIf the settings continue on the following screen(s), touch the and keys to move back and forth through the screens. To return to the category selection screen, touch the [OK] key.

DThe currently set numerical value is displayed.

ENumerical values can be set by touching the and keys.

8-3