Sharp AR-FX12 operation manual Storing or Deleting AN Original Size

STORING, DELETING, AND USING ORIGINAL SIZES

Up to 9 special original sizes can be stored. Stored sizes can be easily called up and are not erased if the power is turned off. Storing a frequently used original size saves you the trouble of manually setting the size each time you fax that size of document.

To cancel an original size storing, using, or deleting operation, press the [CA] key or touch the [ORIGINAL] key on the screen.

STORING OR DELETING AN ORIGINAL SIZE

1 Touch the [ORIGINAL] key.	6 Enter the X (width) and Y (length) dimensions
	of the original with the	keys.

STANDARD

RESOLUTION

AUTO A4

ORIGINAL

2 Touch the key under [SCAN SIZE].

X

X

(width)

is

initially

CANCEL

OK

A

selected.

Y

Enter X and then touch

X

420

mm(64

432)

the

(

) key to enter Y.

Y

mm(64

297)

A width of 64 to 432 mm

297

(2-1/2 to 17 inch) can be

RECALL

STORE/DELETE

entered

in

X,

and a

length of 64 to 297 mm (2-1/2 to 11-5/8 inch) can be entered in Y.

SCAN SIZE

AUTO A4

100%

7 Touch the [OK] key.

The original size entered in step 6 is stored in the key selected in step 5.

2-SIDED 2-S

BOOKLET TAB

3 Touch the [CUSTOM SIZE] key.

A5R

MANUAL B5

CUSTOM B5R

SIZE

STANDARD SI

To exit, touch the [ORIGINAL] key.

8 When you touch a key that shows an original size in step 5, a message screen appears that contains the keys [CANCEL], [DELETE], and [AMEND].

To cancel the procedure, touch the [CANCEL] key. To delete the selected original size, touch the [DELETE] key.

To change the original size stored in the key, touch the [AMEND] key. The screen of step 6 will appear to let you change the size.

4 Touch the [STORE/DELETE] key.

RECALL STORE/DELETE

5 Touch the original size key () that you wish to store or delete.

			To store an original size,
X68	Y78
			touch a key that does not
			show a size (		).
			Keys that already have an
			original size stored will show
	RECALL	STORE/DELETE
			the stored size (			).
				X68 Y78

To delete or change a stored size, touch the key that shows the size that you wish to delete or change.

If you are storing an original size, go to step 6. If you are deleting an original size, go to step 8. If you are changing an original size, go to step 8 and touch the [AMEND] key.

9 To exit, touch the [ORIGINAL] key.

USING A STORED ORIGINAL SIZE

1 Follow steps 1 to 3 of "STORING OR DELETING AN ORIGINAL SIZE".

2 Touchto use.the original size key that you wish

X68 Y78

RECALL STORE/DELETE

3 Touch the [OK] key.

The stored original size is called up.

1-9