A LOOK AT THE OPERATION PANEL

The operation panel used for the fax function is described below.

1

Model

 

Key name

 

Description in this manual

 

AR-M351N/AR-M451N

 

 

 

 

 

Described in the configuration where

 

 

 

 

 

or when the document

 

 

 

 

 

the

optional

fax expansion

kit

 

 

 

 

 

filing function has been

 

 

 

 

 

(AR-FX12) is

installed on

the

added

 

 

 

 

 

AR-M351N/AR-M451N models.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AR-M351U/AR-M451U

 

 

 

 

 

No functions related to document

 

 

 

 

 

 

filing or Internet fax reception are

 

 

 

 

 

 

described in this manual.

 

 

 

 

 

 

 

 

 

 

 

Touch panel (following page)

Messages and keys appear in the touch panel. Touch the displayed keys to select functions and enter settings.

When a key in the touch panel is touched, a beep sounds and the key is highlighted.

Keys that cannot be selected in a screen are greyed out. If touched, a double-beep will sound to alert you that the key cannot be selected.

Mode select keys (page 2-2)

Use these keys to change modes.

[IMAGE SEND] key

Press to switch to fax mode. The main screen of fax mode will appear.

The screen that appears when this key is selected can be changed with "Default display settings" in the key operator programs (page 8-4).

Numeric keys

Use to enter fax numbers, sub-addresses, passcodes, and numerical settings. (See

"MEMORYBOXESAND SUB-ADDRESSES/PASSCODES REQUIRED FOR F-CODE TRANSMISSION" on page 4-2.)

[C] key (clear key)

Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit is cleared each time you press the key.

When an original is being scanned, this key can also be used to cancel scanning.

[CA] key (clear all key)

Use to cancel a transmission or programming operation. When this key is pressed, the operation is cancelled and you return to the main screen described on the following page.

This key is also used to cancel resolution, paper size and special mode settings.

[ ] key (page 5-3)

This is used to produce tone signals when you are on a pulse dial line.

[START] key (page 2-3)

Press to begin scanning an original for fax transmission.

NOTE

For the names and functions of the parts of the machine, see page 1-9 of the "Operation manual (for general information and copier operation)".

1-3

Page 11
Image 11
Sharp AR-FX12 operation manual Look AT the Operation Panel