Sharp AR-FX12 Loading a Document, Using the Automatic Document Feeder, Using the Document Glass

LOADING A DOCUMENT

A document can be loaded in the automatic document feeder or on the document glass. Use the automatic document feeder when faxing a large number of sheet originals. Use the document glass to fax originals that cannot be scanned using the automatic document feeder such as thick or thin sheet originals or bound originals such as books.

USING THE AUTOMATIC DOCUMENT FEEDER

1 Lift the document glass cover and make sure a document is not placed on the document glass. Gently close the cover.

2 Adjust the document guides on the automatic document feeder to the width of the document.

3 Align the edges of the document pages and then insert the stack in the document feeder so that the first page is face down.

Insert the stack into the

automatic document feeder until it stops. The stack should not be higher than the indicator line (maximum 50 pages, or 30 pages for 8-1/2"x14" or larger documents).

NOTES

Use the automatic document feeder for long originals. The document glass cannot be used. When faxing a long original, touch the [LONG SIZE] key in step 3 of "MANUALLY SETTING THE SCANNING SIZE" (page 1-8).

USING THE DOCUMENT GLASS

1 Open the document glass cover, and place the document face down on the document glass. Gently close the cover.

Regardless of the size of the original, place the original in the far left corner of the document glass. (Align the upper left-hand corner of the original with

the tip of the mark.)

Original size detector

Document glass scale mark

A5
B5		B4
	A4		A3

Document glass scale mark

B5R

A4R

NOTE

Do not place any objects under the original size detector plate. Closing the document glass cover with an object underneath may damage the original size detector plate and prevent correct detection of the document size.

1-7