Sharp AR-FX12 Sending a FAX, Basic Procedure for Sending Faxes, Check the original size

STANDARD

RESOLUTION

AUTO A4

ORIGINAL

SENDING A FAX

BASIC PROCEDURE FOR SENDING FAXES

1 Make sure the machine is in fax mode.

4 If needed, adjust the resolution setting. (Refer to page 1-10.)

FAX MODE SWITCH

E-MAIL/FTP

INTERNET FAX

SPEAKER

FAX

MODE SWITCH

When the [IMAGE SEND] key light is on, the machine is in fax mode. If the light is not on, press the [IMAGE SEND] key.

If the network scanner option is installed, touch the [MODE SWITCH] key and then the [FAX] key to switch to fax mode.

When fax mode is selected, "FAX" appears in the top half of the [MODE SWITCH] key.

STANDARD

RESOLUTION

AUTO A4

ORIGINAL

5 If needed, adjust the exposure setting. (Refer to page 1-11.)

AUTO

EXPOSURE

STANDARD

RESOLUTION

AUTO

ORIGINAL

6 If desired, touch the [FILE] key or the [QUICK FILE] key.*

2 Load the original.

Using the automatic document feeder: Page 1-7

Using the document glass: Page 1-7

If you are using the document glass to send multiple pages, load the first page first.

NOTE

You cannot load documents in both the automatic document feeder and on the document glass and send them in a single fax transmission.

3 Check the original size.

If the address book screen appears, touch

the [CONDITION SETTINGS] key to display the condition

settings screen (page 1-5).

If the original is not a standard size or the size was not detected correctly, touch the [ORIGINAL] key to specify the original size. (See "MANUALLY SETTING THE SCANNING SIZE" on page 1-8.)

*Can only be used on the AR-M351N/AR-M451N, or when the document filing function has been added.

		These keys are used to
		store the scanned image
	SPECIAL MODES
		in the	machine's		hard
ESS
		disk. The stored image
	FILE
		can	be	printed	or
TION
	QUICK FILE	transmitted		again	at a

100% later time.

For information on this function, see "Document filing functions" in chapter 7 of the Operation manual (for general information and copier operation).

If the [FILE] key is greyed out, only the [QUICK FILE] key can be selected.

When you touch the [QUICK FILE] key, a message asking you to confirm the save will appear. Touch the [OK] key in the message screen and go to the next step.

If you wish to cancel the save, touch the [QUICK FILE] key after touching the [OK] key so that the [QUICK FILE] key is no longer highlighted.

2-2