Russound CAS44 manual Rnet Source Audio and IR Input Connections, Rnet Source Audio Connections

INSTALLER

MAKING CONNECTIONS

RNET Source Audio and IR Input Connections

RNET Source Audio Connections

The CAS44 supports audio connections to Russound RNET components such as the ST2 Tuner and the SMS3 Media Server.

Using quality RCA signal cables, connect the Left and Right Audio outputs from each RNET source to the corresponding inputs on the CAS44 con- troller. Label each cable with the name of the selected source and the Source Audio input num- ber located on the CAS44.

Common IR Connections

The CAS44 uses two Common IR jacks to allow control of the source equipment with IR signals received through the keypad. The connection for

the Common IR Out jack is made using an IR link cable with a 1/8’’ plug.

An IR Link Cable (Russound P/N 09-0508) is used to connect the IR In of the source to the Common IR Out jack on the CAS44. The ST2S Tuner can be controlled by infrared commands received through either of the two IR connec- tions on the rear panel. These components can be controlled through the keypads with the CAS- RC remote control, or with the source remotes (ST2-RC, SMS3-RC). When used with the KPL key- pad, there will be no RNET source information sent to the keypad display.

Russound #09-0508 IR Link Cable for IR Control of equipment

IR Link Cable

Pos (+)

Neg (–)

SMS3 Media Server

	SMS3			LAN
	Smart Media Server		MOUSE
					RS232
		POWER		COMPOSITE
LINK
	IR IN		CRT VGA	S-VIDEO VIDEO	INTERFACE
		+12VDC
	1394	6A MAX	KEYBOARD
					C	US

IN	OUT	AUDIO OUTPUTS	USB 2.0/1.1	ASSEMBLED IN THE USA
				NEWMARKET, NH

RCA Cables IR Link Cable

CAS44 Controller

IR Link Cable

ST2 Tuner

RCA Cables

ST2 Smart Tuner

LOOP

TUNER 2

LOOP

TUNER 1

Serial#

NEWMARKET, NH U.S.A.

FM COAX

ANTENNA

FM COAX

ANTENNA

LINK

RS-232

AUDIO OUTPUT

AUDIO OUTPUT

KEYPAD PORTS

IR

L

R

IR

L

R

12VDC 1.25A

INTERFACE

IN

OUT

IN KOREA

MADE

19