12VDC Mute Trigger In
When 12VDC is applied to the Mute In, the system will fully mute all zones in the system. The connections for the trigger are made using a two-conductor cable with 1/8” male mini-plug jacks. The tip is positive (+) and sleeve is nega- tive (-). This allows for the connection of an exter- nal paging or muting device. Note: The CAS44 will not accept a paging audio input; however, if used with an independent paging system with 12V trigger out, that can be used to trigger the mute.
INSTALLER
MAKING CONNECTIONS
12VDC Mute Trigger In/Trigger Out
12VDC System Trigger Out
Trigger Out 12VDC output is used for triggering an external amplifier or other component. The connections for the output are made using a two-conductor cable with 1/8” male mini-plug jacks at each end. The tip is positive (+) and sleeve is negative (-). The System Trigger Out supplies 12VDC when the first keypad is turned on. The 12 VDC is removed 5 minutes after the last keypad is turned off.
