Installation Instructions
TOOLS AND MATERIALS REQUIRED
(NOT SUPPLIED)
Pencil and | Phillips and | Duct tape |
tape measure | Flat blade screwdrivers |
|
|
|
|
Electric drill with | ¼” pivoting hex socket |
1/8” and 3/8” bits |
|
Spirit level | Safety glasses |
|
Flashlight
cUL Listed Wire nuts
Pliers
Hammer
Metal snips
Wire Cutter/Stripper
Saber saw or Key Hole Saw
Ladder | Allen Wrench |
Additional Materials:
•120V 60Hz. 15 or 20 Amp, 2 wire with ground. Properly grounded branch circuit.
•Strain relief for junction box.
•7” round metal duct or 3¼” x 12” rectangular duct, length to suit installation.
OPTIONAL ACCESSORIES
■Kit 01235 Model PVIG940
Chimney + Structure 84 - 121.5 cm (Venting)
■Kit 01237 Model PVWG936 Chimney 51.5 cm
■Kit 01238 Model PVWT936
Chimney 70 - 140 cm (Venting)
■Kit 01239 Models PVWS930/936
Chimney 92.5 - 132 cm (Venting)
Ductless Recirculating Kit
■Kit 01378 Models PVWS930/936, PVWT936 Carbon Filter + Filtrating Deflector: Changes Hood from Venting to Filtrating
■Kit 01379 Model PVWIG940
Carbon Filter + Filtrating Deflector +
RUA: Changes Hood from Venting to
Filtrating
PARTS PROVIDED
MODELS PVWS930, PVWS936 AND PVWT936
•Hood canopy with internal blower, grease filters and lights already installed
•Duct covers
•Duct Cover support bracket
•Transition (may be already installed)
•Hardware Packet:
Note: the hardware packet contains several fittings material. For models PVWS930, PVWS936 and PVWT936, consider what is listed below ONLY:
•
•Hook with leveling screws x 2
•Template
•Use, Care and Installation Guide
•10 x 60 drywall anchors x 2 (To attach duct cover support bracket)
•6 x 80 screws x 8 + washers x 8 (2 To attach duct cover support bracket + 6 to attach the hood canopy)
•3,5 x 9,5 screws x 6 (2 to attach the transition + 4 to attach the duct cover)
1 Ft = 0.3 m 1” = 2.5 cm
1 0