Care and cleaning of the vent hood. | www.GEAppliances.ca |
Be sure electrical power is off and all surfaces are cool before cleaning or servicing any part of the vent hood. Make sure lamps are cold before cleaning the hood.
To clean the filter/s
We recommend you wash the filters at least once a month, by hand or in the dishwasher. Let the water drip out of the holes on the edges and leave the filters to dry completely before reinstalling them.
To clean the hood surface
For general cleaning operations, rub the external part of the hood made of glass, using soapy water or household cleaning products, rinsing it thoroughly and drying it with a soft dry cloth to avoid marks being left by the water.
Safety Instructions Operating
Stainless Steel Surfaces
Do not use a steel-wool pad; it will scratch the surface.
Shake bottle well.
Place a small amount of CERAMA BRYTE® Stainless Steel Cleaning Polish and Conditioner on a dry cloth or dry paper towel.
Clean a small area (approximately 8” x 8” or
20.3x 20.3 cm), rubbing with the grain of the stainless steel if applicable.
Dry and buff with a clean, dry paper towel or soft cloth.
Repeat as necessary.
Instructions Care and Cleaning Troubleshooting Tips Consumer Support
5