GE JVB37, JVB67 Operating Instructions, Connect Power, Installing the Cooktop, Optional Kits

Page 17

Connect Power

Plug power cord into a properly grounded receptacle.

Safety Instructions

Installing the Cooktop

With the Downdraft in the “Down” position, place the cooktop into the cutout.

Push the cooktop back until the back edge of the cooktop just barely touches the front edge of the downdraft cover.

Using a dime as a thickness gauge, align the cooktop so that there is a minimum uniform gap of 0.05″ (the thickness of a dime) between the cooktop and the downdraft cover.

NOTE: Do not force the downdraft cover to move rearward when aligning the cooktop. This may cause the downdraft cover to impact and damage the cooktop when the vent is raised and lowered.

NOTES:

Accurate alignment of cooktop and downdraft is necessary to ensure that there is no interference when air vent is raised and lowered. There should be a gap of 0.05″ (the thickness of a dime) between the back edge of the cooktop and the front edge of the downdraft cover.

Radiant cooktops cannot be flush mounted when using this downdraft vent.

Operating Instructions

Optional Kits

JXRB57 optional accessory for indoor remote

JXBC57 optional outdoor cover accessory for

location of the blower/motor assembly. Use this

remote installation of blower and motor assembly

kit when the blower and motor assembly will be

on an outside wall.

located outside or below the cabinet floor.

 

17

Installation Instructions Troubleshooting Tips Consumer Support

Image 17
Contents Write the model and serial numbers here Model # Serial # 959-0278-001 Rev. BElectric SHOCK, or Injury to Persons Observe the Following Safety Precautions Read and Save These Instructions Safety Using the downdraft systemInstructions Troubleshooting Tips Consumer Support Using the CooktopCooking Tips Consumer SupportGrease filters Painted or metal surfacesImportant Save these instructions for the local To PERSONS, Observe the FollowingIf cabinetry is used above the cooking surface InstructionsAdvance Planning-Ductwork 30″ Cooktops/Downdraft Unit JVB37 36″ Cooktops/Downdraft Unit JVB67 Cutting guide Operating Power SupplyDuctwork Length and Dust Fittings Gas CooktopsVenting Options Side to side adjustmentsRotation Discharge directionInstall the Ductwork Install Downdraft VentInstall Raise/Lower Switch Installing the Cooktop Connect PowerSafety Instructions Operating InstructionsRAISE/LOWER switch did Before You Call For Service…Fan does not work Vent does not riseFor The Period GE Will Replace GE Downdraft System WarrantyWhat GE Will Not Cover One YearParts and Accessories Schedule ServiceConsumer Support GE Appliances Website Real Life Design Studio
Related manuals
Manual 40 pages 9.53 Kb Manual 20 pages 37.21 Kb

JVB37, JVB67 specifications

The GE JVB37 and JVB67 are advanced connected commercial water heaters designed to meet the challenges of modern facilities while prioritizing efficiency, safety, and reliability. With an acute emphasis on smart technology, these models provide user-friendly features and robust performance for various applications, including restaurants, hotels, and multi-family buildings.

One of the standout features of the GE JVB37 and JVB67 is their energy efficiency. Both models utilize a state-of-the-art heat pump technology, which allows them to consume significantly less energy compared to traditional electric or gas-fired water heaters. This results in lower operating costs and a reduced environmental footprint, making them ideal choices for businesses looking to enhance their sustainability efforts.

The JVB37 has a 37-gallon capacity, while the JVB67 offers a larger 67-gallon capacity, catering to different usage requirements. These models are equipped with an intuitive digital interface that provides real-time monitoring and control, ensuring users can easily adjust the temperature settings and monitor energy consumption. Moreover, the connectivity features enable remote management through mobile apps or smart devices, providing added convenience for facility managers.

In terms of safety, both models incorporate advanced features such as leak detection, automatic shut-off valves, and tamper-proof designs. These safeguards help prevent potential hazards while ensuring a reliable supply of hot water. Furthermore, the build quality of the JVB37 and JVB67 reflects GE's commitment to longevity, with durable materials that resist corrosion and wear, ensuring years of dependable service.

The installation of the JVB37 and JVB67 is simplified due to their compact designs, allowing for flexibility in various settings. Whether mounted on the wall or positioned in tight spaces, these water heaters can adapt to different layouts without compromising performance.

Overall, the GE JVB37 and JVB67 are exemplary models in the market of connected commercial water heaters, seamlessly blending innovation with practicality. Their energy-efficient operation, combined with smart technologies and robust safety features, makes them ideal solutions for businesses aiming to optimize their hot water needs while prioritizing sustainability and efficiency.