GE JVB67, JVB37 owner manual Electric SHOCK, or Injury to Persons Observe the Following

Page 2

Instructions Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

PLEASE NOTE: The downdraft vent system you have purchased was designed to be used with GE, GE Profile and GE Profile Performance cooktops listed in this manual.

WARNING!

For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life.

WARNING—TO REDUCE THE RISK OF FIRE,

ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

Consumer Support Troubleshooting Tips Installation Instructions Operating

A. Use this unit only in the manner intended by the manufacturer. If you have questions, contact the manufacturer.

B. Before servicing or cleaning unit, switch power off at service panel and lock the service disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

CAUTION: For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel-burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA), and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

Ducted fans must always be vented to the outdoors.

To reduce the risk of fire, use only metal ductwork.

PVC sewer pipe can be used as duct under concrete slab if allowed by local code board.

This unit must be grounded.

2

Image 2
Contents 959-0278-001 Rev. B Write the model and serial numbers here Model # Serial #Electric SHOCK, or Injury to Persons Observe the Following Safety Precautions Read and Save These Instructions Instructions Troubleshooting Tips Consumer Support Using the downdraft systemSafety Using the CooktopGrease filters Consumer SupportCooking Tips Painted or metal surfacesTo PERSONS, Observe the Following Important Save these instructions for the localInstructions If cabinetry is used above the cooking surfaceAdvance Planning-Ductwork 30″ Cooktops/Downdraft Unit JVB37 36″ Cooktops/Downdraft Unit JVB67 Cutting guide Ductwork Length and Dust Fittings Power SupplyOperating Gas CooktopsRotation Side to side adjustmentsVenting Options Discharge directionInstall Downdraft Vent Install the DuctworkInstall Raise/Lower Switch Safety Instructions Connect PowerInstalling the Cooktop Operating InstructionsFan does not work Before You Call For Service…RAISE/LOWER switch did Vent does not riseWhat GE Will Not Cover GE Downdraft System WarrantyFor The Period GE Will Replace One YearConsumer Support GE Appliances Website Schedule ServiceParts and Accessories Real Life Design Studio
Related manuals
Manual 40 pages 9.53 Kb Manual 20 pages 37.21 Kb

JVB37, JVB67 specifications

The GE JVB37 and JVB67 are advanced connected commercial water heaters designed to meet the challenges of modern facilities while prioritizing efficiency, safety, and reliability. With an acute emphasis on smart technology, these models provide user-friendly features and robust performance for various applications, including restaurants, hotels, and multi-family buildings.

One of the standout features of the GE JVB37 and JVB67 is their energy efficiency. Both models utilize a state-of-the-art heat pump technology, which allows them to consume significantly less energy compared to traditional electric or gas-fired water heaters. This results in lower operating costs and a reduced environmental footprint, making them ideal choices for businesses looking to enhance their sustainability efforts.

The JVB37 has a 37-gallon capacity, while the JVB67 offers a larger 67-gallon capacity, catering to different usage requirements. These models are equipped with an intuitive digital interface that provides real-time monitoring and control, ensuring users can easily adjust the temperature settings and monitor energy consumption. Moreover, the connectivity features enable remote management through mobile apps or smart devices, providing added convenience for facility managers.

In terms of safety, both models incorporate advanced features such as leak detection, automatic shut-off valves, and tamper-proof designs. These safeguards help prevent potential hazards while ensuring a reliable supply of hot water. Furthermore, the build quality of the JVB37 and JVB67 reflects GE's commitment to longevity, with durable materials that resist corrosion and wear, ensuring years of dependable service.

The installation of the JVB37 and JVB67 is simplified due to their compact designs, allowing for flexibility in various settings. Whether mounted on the wall or positioned in tight spaces, these water heaters can adapt to different layouts without compromising performance.

Overall, the GE JVB37 and JVB67 are exemplary models in the market of connected commercial water heaters, seamlessly blending innovation with practicality. Their energy-efficient operation, combined with smart technologies and robust safety features, makes them ideal solutions for businesses aiming to optimize their hot water needs while prioritizing sustainability and efficiency.