GE PVM2070 warranty B3. Attach the Mounting Plate to the Wall

Page 16

Installation Instructions

B3. ATTACH THE MOUNTING

PLATE TO THE WALL

Attach the plate to the wall using toggle bolts. At least one wood screw must be used to attach the plate to a wall stud.

1Remove the toggle wings from the bolts.

2Insert the bolts into the mounting plate through

the holes designated to go into drywall and reattach the toggle wings to 3⁄4″ onto each bolt.

To use toggle bolts:

Spacing for Toggles More

Than Wall Thickness

Mounting

Toggle Wings

Toggle

Plate

Bolt

 

Wall

Bolt End

3Place the mounting plate against the wall and insert the toggle wings into the holes in the wall to mount the plate.

NOTE: Before tightening toggle bolts and wood screw, make sure the tabs on the mounting plate touch the bottom of the cabinet when pushed flush against the wall and that the plate is properly centered under the cabinet.

CAUTION: Be careful to avoid pinching fingers between the back of the mounting plate and the wall.

4Tighten all bolts. Pull the plate away from the wall to help tighten the bolts.

B4. USE TOP CABINET TEMPLATE FOR PREPARATION OF TOP CABINET

You need to drill holes for the top support screws and a hole large enough for the power cord to fit through.

•Read the instructions on the TOP CABINET TEMPLATE.

•Tape it underneath the top cabinet.

•Drill the holes, following the instructions on the

TOP CABINET TEMPLATE.

CAUTION: Wear safety goggles when drilling holes in the cabinet bottom.

B5. ADAPTING MICROWAVE BLOWER FOR OUTSIDE BACK EXHAUST

1Remove and save screw that holds blower motor to microwave.

Blower Motor

Back of

Microwave

Blower Motor

Screw

2Carefully pull out the blower unit. The wires will extend far enough to allow you to adjust the blower unit.

BEFORE:

End B

 

Fan Blade

 

Openings

 

Facing Up

 

End A

 

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Before YOU Begin Read Carefully Keep These InstructionsInstallation Instructions ContentsImportant Safety Instructions Electrical RequirementsOutside TOP Exhaust Example only Hood ExhaustOutside Back Exhaust Example only Exhaust connection Maximum duct lengthDamage SHIPMENT/ Installation Parts IncludedHardware Packet Additional PartsTools YOU will Need Mounting SpacePlacement of the Mounting Plate Finding the Wall StudsDetermining Wall Plate Location Under Your Cabinet Microwave Must be LevelAligning the Wall Plate Set the mounting plate asideRecirculating NON-VENTED Ductless SeeA1. Attach the Mounting Plate to the Wall Installation OverviewTo use toggle bolts A2. USE TOP Cabinet Template for Preparation of TOP Cabinet A4. Mount the Microwave OvenA3. Check for Proper Damper Operation A6. Connecting Ductwork A5. Adjust the Exhaust AdaptorA4. Mount the Microwave Oven B2. Remove Exhaust Adaptor B1. Preparing the Rear Wall for Outside Back ExhaustB5. Adapting Microwave Blower for Outside Back Exhaust B3. Attach the Mounting Plate to the WallB4. USE TOP Cabinet Template for Preparation of TOP Cabinet B5. Adapting Microwave Blower for Outside Back Exhaust B6. Mount the Microwave Oven C2. USE TOP Cabinet Template for Preparation of TOP Cabinet C1. Attach the Mounting Plate to the WallRecirculating Non-Vented Ductless C3. Check Microwave Assembly C4. Adapting Microwave Blower for RecirculationC4. Adapting Microwave Blower for Recirculation C5. Mount the Microwave OvenC6. Installing Charcoal Filter C5. Mount the Microwave OvenBefore YOU USE Your Microwave 49-40569 07-07 JR DE68-03451A Antes DE Empezar LEA Cuidadosamente Guarde Estas InstruccionesInformación general ContenidoGuía de instalación paso por paso Instrucciones DE Seguridad Importantes Requisitos EléctricosEscape Superior Externo Ejemplo Solamente Campana DE EscapeEscape Posterior Externo Ejemplo Solamente Conexiones de escape Longitud máxima del conductoDaños Envío Instalación Partes IncluidasPaquete DE Elementos Partes AdicionalesHerramientas QUE Necesitará Espacio DE MontajeCómo Colocar EL Plato DE Montaje Cómo Encontrar LOS Postes DE Viga EN LA ParedEL Horno Microondas Debe Quedar Nivelado Cómo Alinear EL Plato DE Montaje Sobre LA Pared Agujero aEscape Superior Exterior Conducto Vertical Escape Posterior Exterior Conducto HorizontalRecirculación SIN Conducto DE Ventilación Ver páginaA1. Cómo Adherir LA Placa DE Montaje a LA Pared Perspectiva General DE LA InstalaciónPara usar los tornillos basculantes A3. Inspeccione LA Operación DEL Regulador DE Tiro A4. Cómo Montar EL Horno MicroondasA6. Cómo Conectar EL Conducto A4. Cómo Montar EL HornoA5. Cómo Ajustar EL Adaptador DE Escape B2. Remueva EL Adaptador DE Escape NotaB3. Cómo Adherir EL Plato DE Montaje a LA Pared B5. Cómo Adaptar EL CalefactorDEL Microondas Para EL Escape Exterior DEL Microondas Para EL Escape Exterior continuación B6. Cómo Montar EL Horno Microondas C1. Cómo Adherir LA Placa DE Montaje a LA Pared Recirculación Sin conducto de ventilaciónPerspectiva General DE LA Instalación C3. Inspeccione LA Ensambladura DEL Microondas Recirculación continuación DEL Microondas Para LAC5. Cómo Montar EL Horno Microondas C5. Cómo Montar EL Horno C6. Cómo Instalar EL Filtro DE CarbonillaAntes DE Comenzar a Usar SU Horno Microondas 49-40569-S 07-07 JR

PVM2070 specifications

The GE PVM2070 is a compact over-the-range microwave oven that combines functionality with efficiency, making it an asset in any modern kitchen. This model is designed to address the cooking needs of families while maximizing space utilization. With a sleek design and user-friendly interface, the PVM2070 stands out as a preferred choice among consumers.

One of the key features of the GE PVM2070 is its 1.9 cubic feet capacity, which provides ample space for cooking larger dishes without compromising on convenience. This microwave is equipped with 1000 watts of power, ensuring that food heats evenly and efficiently. The unit includes several pre-programmed settings that allow users to quickly reheat leftovers, defrost meat, and cook a variety of popular foods such as popcorn, baked potatoes, and pizza.

Another noteworthy technology integrated into the GE PVM2070 is its Sensor Cooking feature. This innovative technology detects moisture levels in the food, automatically adjusting cooking times and power levels for optimal results. This takes the guesswork out of reheating and cooking, ensuring that meals are perfectly cooked every time.

The PVM2070 is also equipped with an easy-to-use digital control panel, featuring a bright LED display that makes it simple to navigate settings. The panel includes a convenient timer, allowing users to track cooking times accurately. Additionally, the unit comes with a turntable that promotes even cooking by rotating food during the heating process, eliminating cold spots.

In terms of design, the GE PVM2070 features a modern, stainless steel exterior that not only enhances kitchen aesthetics but also offers durability and ease of cleaning. The over-the-range configuration frees up valuable counter space, making it ideal for smaller kitchens. Furthermore, this microwave includes an integrated ventilation system that can function as either a recirculating vent or a ducted vent, effectively eliminating smoke, steam, and odors from the kitchen during cooking.

The safety features of the PVM2070 are also commendable, with a child lock option that prevents accidental operation.

Overall, the GE PVM2070 is a reliable and versatile microwave oven that encapsulates advanced cooking technology, making it an excellent addition to any home.
Top Page Image Contents