GE PVM2070 warranty Important Safety Instructions, Electrical Requirements

Page 3

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

This product requires a three-prong grounded outlet. The installer must perform a ground continuity check on the power outlet box before beginning the installation to insure that the outlet box is properly grounded. If not properly grounded, or if the outlet box does not meet electrical requirements noted (under ELECTRICAL REQUIREMENTS), a qualified electrician should be employed to correct any deficiencies.

CAUTION: For personal safety, remove house fuse or open circuit breaker before beginning installation to avoid severe or fatal shock injury.

CAUTION: For personal safety, the mounting surface must be capable of supporting the cabinet load, in addition to the added weight of this 63–85 pound product, plus additional oven loads of up to 50 pounds or a total weight of 113–135 pounds.

CAUTION: For personal safety, this product cannot

be installed in cabinet arrangements such as an island or a peninsula. It must be mounted to BOTH a top cabinet AND a wall.

NOTE: For easier installation and personal safety, it is recommended that two people install this product.

IMPORTANT – PLEASE READ CAREFULLY. FOR PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED TO AVOID SEVERE OR FATAL SHOCK.

The power cord of this appliance is equipped with a three-prong (grounding) plug which mates with a standard three-prong (grounding) wall receptacle

to minimize the possibility

of electric shock hazard from this appliance.

Ensure proper ground exists before use

You should have the wall receptacle and circuit checked by a qualified electrician to make sure the receptacle is properly grounded.

Where a standard two-prong wall receptacle is encountered, it is very important to have it replaced with a properly grounded three-prong wall receptacle, installed by a qualified electrician.

DO NOT, UNDER ANY CIRCUMSTANCES, CUT, DEFORM OR REMOVE ANY OF THE PRONGS FROM THE POWER CORD. DO NOT USE WITH AN EXTENSION CORD.

ELECTRICAL

REQUIREMENTS

Product rating is 120 volts AC, 60 Hertz, 15 amps and

1.58kilowatts. This product must be connected to a supply circuit of the proper voltage and frequency. Wire size must conform to the requirements of the National Electrical Code or the prevailing local code for this kilowatt rating. The power supply cord and plug should be brought to a separate

15- to 20- ampere branch circuit single grounded outlet. The outlet box should be located in the cabinet above the microwave oven. The outlet box and supply circuit should be installed by a qualified electrician and conform to the National Electrical Code or the prevailing local code.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Read Carefully Keep These Instructions Before YOU BeginContents Installation InstructionsElectrical Requirements Important Safety InstructionsHood Exhaust Outside TOP Exhaust Example onlyOutside Back Exhaust Example only Maximum duct length Exhaust connectionAdditional Parts Damage SHIPMENT/ InstallationParts Included Hardware PacketMounting Space Tools YOU will NeedFinding the Wall Studs Placement of the Mounting PlateMicrowave Must be Level Determining Wall Plate Location Under Your CabinetSet the mounting plate aside Aligning the Wall PlateSee Recirculating NON-VENTED DuctlessInstallation Overview A1. Attach the Mounting Plate to the WallTo use toggle bolts A4. Mount the Microwave Oven A2. USE TOP Cabinet Template for Preparation of TOP CabinetA3. Check for Proper Damper Operation A5. Adjust the Exhaust Adaptor A6. Connecting DuctworkA4. Mount the Microwave Oven B1. Preparing the Rear Wall for Outside Back Exhaust B2. Remove Exhaust AdaptorB3. Attach the Mounting Plate to the Wall B5. Adapting Microwave Blower for Outside Back ExhaustB4. USE TOP Cabinet Template for Preparation of TOP Cabinet B5. Adapting Microwave Blower for Outside Back Exhaust B6. Mount the Microwave Oven C1. Attach the Mounting Plate to the Wall C2. USE TOP Cabinet Template for Preparation of TOP CabinetRecirculating Non-Vented Ductless C4. Adapting Microwave Blower for Recirculation C3. Check Microwave AssemblyC5. Mount the Microwave Oven C4. Adapting Microwave Blower for RecirculationC5. Mount the Microwave Oven C6. Installing Charcoal FilterBefore YOU USE Your Microwave 49-40569 07-07 JR DE68-03451A LEA Cuidadosamente Guarde Estas Instrucciones Antes DE EmpezarContenido Información generalGuía de instalación paso por paso Requisitos Eléctricos Instrucciones DE Seguridad ImportantesCampana DE Escape Escape Superior Externo Ejemplo SolamenteEscape Posterior Externo Ejemplo Solamente Longitud máxima del conducto Conexiones de escapePartes Adicionales Daños Envío InstalaciónPartes Incluidas Paquete DE ElementosEspacio DE Montaje Herramientas QUE NecesitaráCómo Encontrar LOS Postes DE Viga EN LA Pared Cómo Colocar EL Plato DE MontajeEL Horno Microondas Debe Quedar Nivelado Agujero a Cómo Alinear EL Plato DE Montaje Sobre LA ParedVer página Escape Superior Exterior Conducto VerticalEscape Posterior Exterior Conducto Horizontal Recirculación SIN Conducto DE VentilaciónPerspectiva General DE LA Instalación A1. Cómo Adherir LA Placa DE Montaje a LA ParedPara usar los tornillos basculantes A4. Cómo Montar EL Horno Microondas A3. Inspeccione LA Operación DEL Regulador DE TiroA4. Cómo Montar EL Horno A6. Cómo Conectar EL ConductoA5. Cómo Ajustar EL Adaptador DE Escape Nota B2. Remueva EL Adaptador DE EscapeB5. Cómo Adaptar EL Calefactor B3. Cómo Adherir EL Plato DE Montaje a LA ParedDEL Microondas Para EL Escape Exterior DEL Microondas Para EL Escape Exterior continuación B6. Cómo Montar EL Horno Microondas Recirculación Sin conducto de ventilación C1. Cómo Adherir LA Placa DE Montaje a LA ParedPerspectiva General DE LA Instalación C3. Inspeccione LA Ensambladura DEL Microondas DEL Microondas Para LA Recirculación continuaciónC5. Cómo Montar EL Horno Microondas C6. Cómo Instalar EL Filtro DE Carbonilla C5. Cómo Montar EL HornoAntes DE Comenzar a Usar SU Horno Microondas 49-40569-S 07-07 JR

PVM2070 specifications

The GE PVM2070 is a compact over-the-range microwave oven that combines functionality with efficiency, making it an asset in any modern kitchen. This model is designed to address the cooking needs of families while maximizing space utilization. With a sleek design and user-friendly interface, the PVM2070 stands out as a preferred choice among consumers.

One of the key features of the GE PVM2070 is its 1.9 cubic feet capacity, which provides ample space for cooking larger dishes without compromising on convenience. This microwave is equipped with 1000 watts of power, ensuring that food heats evenly and efficiently. The unit includes several pre-programmed settings that allow users to quickly reheat leftovers, defrost meat, and cook a variety of popular foods such as popcorn, baked potatoes, and pizza.

Another noteworthy technology integrated into the GE PVM2070 is its Sensor Cooking feature. This innovative technology detects moisture levels in the food, automatically adjusting cooking times and power levels for optimal results. This takes the guesswork out of reheating and cooking, ensuring that meals are perfectly cooked every time.

The PVM2070 is also equipped with an easy-to-use digital control panel, featuring a bright LED display that makes it simple to navigate settings. The panel includes a convenient timer, allowing users to track cooking times accurately. Additionally, the unit comes with a turntable that promotes even cooking by rotating food during the heating process, eliminating cold spots.

In terms of design, the GE PVM2070 features a modern, stainless steel exterior that not only enhances kitchen aesthetics but also offers durability and ease of cleaning. The over-the-range configuration frees up valuable counter space, making it ideal for smaller kitchens. Furthermore, this microwave includes an integrated ventilation system that can function as either a recirculating vent or a ducted vent, effectively eliminating smoke, steam, and odors from the kitchen during cooking.

The safety features of the PVM2070 are also commendable, with a child lock option that prevents accidental operation.

Overall, the GE PVM2070 is a reliable and versatile microwave oven that encapsulates advanced cooking technology, making it an excellent addition to any home.
Top Page Image Contents