GE JEM31H manual Mounting the Oven, ToRemove the Oven from Cabinet Mount

Mounting the Oven

To aid installation, we suggest that you use some solid support such as books to hold the oven while you are securing it with the mounting bolts. (Fig. 16)

Fig. 16

Make sure that whatever you use

is stacked or cut as close as possible to the height needed for the oven to reach the cabinet bottom.

1.Place the oven on the support and move it into position. Lift the oven, aligning the mounting holes on the oven with the bolts.

2.Insert bolts into the mounting holes on the microwave oven. Tighten the bolts to secure the oven to the bottom of the cabinet. (Alternate tightening between bolts so that oven is drawn up evenly.)

3.Once the oven is securely in

place, you may remove the rubber feet. (If you remove the feet, be sure to store them in a secure place because you may want to use the microwave oven as a countertop oven at a later date.)

4.Plug the power cord into a three prong (grounding) wall receptacle.

ToRemove the Oven from Cabinet Mount

Step 1: Replace the rubber feet.

Step 2: Fully support the microwavewith something sturdy. For example, use telephone books or encyclopedias,stacked evenly and close enough to balance the weight of the oven. (Fig. 16)

Step 3: Open the cabinet. Using a screwdriver, begin to remove the screws holding the microwave oven in place by turning them counterclockwise.

(Alternate between screws so that the oven is loosened as evenly as possible.)

Note: Before final removalof the screws, check to be sure that the microwaveoven is being suitably supported to prevent it from falling or sliding. (Fig. 16)

.,

25

—