3 Connect to a TV equiped with audio/video inputs.
Connect as below for watching received channels or recorded contents. Watching via the RF OUT terminal is not available.
Introduction
(red) | (white) | (yellow) | To OUTPUT |
|
|
|
To OUTPUT | To OUTPUT | ||
(R/L) | (VIDEO) | ||
|
If the TV has an
Video/audio cable (supplied) |
| TV or monitor with |
|
| |
To | audio/video inputs | |
To video inputs | (yellow) |
|
| (white) |
|
To audio input | (red) |
|
4 Connect the power cord of the recorder to a wall outlet.
Make sure that the powered recorder lights the ON/STANDBY indicator on the front panel.
To wall outlet
Notes
•Refer to the owner’s manual of the connected TV as well.
•When you connect the recorder to your TV, be sure to turn off the power and unplug both units from the wall outlet before any connections.
•If your television set has one audio input, connect the left and right audio outputs of the recorder to a Y cable adapter (not supplied) and then connect to your TV.
•Connect the recorder directly to your TV. If you connect the recorder to a VCR, TV/VCR combination, video selector or AV amplifier, the playback picture may be distorted due to copy protection.
Connections
Basic Setup
21