6 Cable input
ENTER
STEP 2: Configuring for Cable
Your DVD Recorder has more than one input jack. To operate properly with your cable box, the TV Guide On Screen system needs to know which one your cable box is plugged into. You may have to look at the back of your DVD Recorder
if you are unsure, as an incorrect selection will result in a blue or snowy screen while watching TV.
Please indicate which DVD Recorder input the cable box is plugged into.
TUNER
Line 1
Line 3
Introduction
Press 
/ 
to select, then press ENTER.
If you select “TUNER”, you will go to step 7.
If you select “Line 1” or “Line 3”, you will go to step 8.
7 Tuning channel for the cable box
STEP 2: Configuring for Cable
To operate properly with your cable box, the TV Guide On Screen system needs to know the channel your DVD Recorder is on when using the cable box. The most commonly used output channel is 03. Please consult your cable box provider if you are unsure, as an incorrect selection will result in a blue or snowy screen while watching TV.
ENTER
What is your DVD Recorder tuned to when using the cable box?
Ch 2
Ch 3
Ch 4
Press 
/ 
to select, then press ENTER.
8 Read the instructions and observe the diagram. Confirm that the 
page 25) If OK, press ENTER.
ENTER
(Continued)
Connections
Basic Setup
35