Toshiba RD-XS34SU Press / to select the picture shape, When the proper setting is selected, press

Page 43

4 Press / to select the picture shape.

4:3 LB:

Select when a standard 4:3 TV is

ENTER connected.

Displays theatrical images with masking bars above and below the picture.

4:3 normal:

Select when a standard 4:3 TV is connected.

Displays pictures cropped to fill your TV screen. Either or both of the picture’s sides are cut off.

16:9 wide:

Select when a 16:9 wide TV is connected.

16:9 shrink:

Select when a 16:9 wide TV is connected.

When a 4:3 aspect ratio image has been elongated to 16:9 wide picture size, use this setting.

Masking bars to the right and left appears.

5 When the proper setting is selected, press

ENTER.

The submenu disappears.

To exit the setting menu, press SETUP button.

ENTER

Notes

Actual picture shape may depend on signal types of broadcasts or input sources, or settings on the connected TV. Refer to the owner’s manual of your TV.

When a DVD video disc has a particular available picture shape, the contents may not be compatible with other picture shapes.

“C: TV shape setting” is complete. Go to “D: Remote control settings”. ( page 44)

Introduction

Connections

Basic Setup

43

Image 43
Contents RD-XS34SU RD-XS34SC This HDD/DVD video recorder employs a Laser System See service procedureMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions When not in use PrecautionsIntroduction Exemptions Power OutageWait Introduction PrecautionsConnections Accessories Remote control Batteries AAA x Installation procedurePlayback Restrictions About this productSome differences About the hard disc drive HDDFor recording / playback Disc Mark Specification Remarks Using different disc types for different purposesChoosing a disc Disc For playback only Disc Mark Specification RemarksIntroduction Choosing a disc On DVD-RAM discsDVD-RAM discs with cartridges are recommended for recording On DVD-RW discs On DVD-R discsMarks on DVD video discs On storing discs Structure of disc contentsOn cleaning discs On handling discsTable of Contents Close the cover Preparation of the remote controlOperating with the remote control Open the cover Insert batteries AAA sizeWhen you connect a TV equipped with audio/ video inputs Connection procedureWhen you connect an audio system Connections Connecting an antenna and TVConnect to a TV equiped with audio/video inputs Connect the power cord of the recorder to a wall outletYou will need to Connecting to cable TV signalThis set-up will allow you to When the satellite system has audio/video outputs Connecting to a satellite systemConnecting the G-LINK cable Connecting to a TV equipped with component video inputs Make the setting on Connecting to an audio systemPage Basic Setup Starting up the recorder If a message appears Language settingTV Guide On Screen setup Country Setup selectionPress / to select, then press Enter Cable connection Cable serviceBasic Setup TV Guide On Screen setup ZIP or postal codeCable input Tuning channel for the cable boxCable box brand name Press / to select, then press Enter 13Confirmation 12Antenna connection15Information 14ConfirmationRead the information and press Enter Tip on setting Output sound settingPress Setup Press / to select Picture/Audio settings, then press Enter Press / to select Audio out select, then press Enter Basic Setup Output sound setting Press / to select the output sound format PCM Once the proper setting is selected, pressPress / to select TV shape, then press TV shape settingPress Setup to display the setup menu Press / to select Display settings, then press EnterPress / to select the picture shape When the proper setting is selected, pressTake this step according to your preference and usage Remote control settingsOperating your TV with the remote control Release TV CodeRCA Brand code tablePress / to select Operational settings, then press Enter Setting up the recorder Press SetupDisabling the remote control for a temporary period Rental Units Limited Ninety 90 Day Warranty on LaborLimited One 1 Year Warranty on Parts Your ResponsibilityHow to Obtain Warranty Services Page Memo Printed on 70% Recycled Paper