Toshiba RD-XS34SC, RD-XS34SU owner manual Setting up the recorder Press Setup

Page 46

Basic Setup

D: Remote control settings (Continued)

Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder

Switches the codes to operate the recorder.

If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each recorder to avoid confusion in the response of the recorders.

Example: Setting this recorder’s remote control mode to DR 2, after another HDD/DVD recorder has been set to DR 1.

(It is necessary to set the remote control mode on both the recorder and the remote control.)

Setting up the recorder

1 Press SETUP.

The setting menu appears.

SETUP

2 Press / to select “Operational settings”, then press ENTER.

	e.g.
ENTER	Operational settings
	Operation beep	Off
	Recording complete beep	On
	IR code	DR 1
	Instant skip interval	30	sec.
	Instant replay interval	10	sec.
	Title thumbnail point	35	sec.
	HDD/RAM title play	Title resume
	Still group interval	3	sec.
	Priority contents	Photo

Press	/ to select “IR code”, then press
3 ENTER.
	e.g.
ENTER	Operational settings
	Operation beep	Off	DR 1
	Recording complete beep	On	DR 2
	IR code	DR 1	DR 3
	Instant skip interval	30 sec.
	Instant replay interval	10 sec.
	Title thumbnail point	35 sec.
	HDD/RAM title play	Title resume
Start	Still group interval	3 sec.
	Priority contents	Photo

Press	/ to select “DR 2” (example), then
4 press ENTER.
	The submenu disappears.
	Press ENTER button and the IR code you selected is
ENTER	activated. Operation may not be possible temporarily until
	you set the corresponding mode of the remote control.
	Proceed to the next setting.

46

Image 46

Contents RD-XS34SU RD-XS34SC This HDD/DVD video recorder employs a Laser System See service procedureMay result in hazardous radiation exposure Location of the required label Important Safety Instructions Additional Safety Instructions When not in use PrecautionsIntroduction Power Outage ExemptionsIntroduction Precautions WaitConnections Installation procedure Accessories Remote control Batteries AAA xAbout the hard disc drive HDD About this productSome differences Playback RestrictionsFor recording / playback Disc Mark Specification Remarks Using different disc types for different purposesChoosing a disc For playback only Disc Mark Specification Remarks DiscIntroduction Choosing a disc On DVD-RAM discsDVD-RAM discs with cartridges are recommended for recording On DVD-RW discs On DVD-R discsMarks on DVD video discs On handling discs Structure of disc contentsOn cleaning discs On storing discsTable of Contents Open the cover Insert batteries AAA size Preparation of the remote controlOperating with the remote control Close the coverWhen you connect a TV equipped with audio/ video inputs Connection procedureWhen you connect an audio system Connecting an antenna and TV ConnectionsConnect the power cord of the recorder to a wall outlet Connect to a TV equiped with audio/video inputsConnecting to cable TV signal You will need toThis set-up will allow you to Connecting to a satellite system When the satellite system has audio/video outputsConnecting the G-LINK cable Connecting to a TV equipped with component video inputs Connecting to an audio system Make the setting onPage Basic Setup Starting up the recorder Language setting If a message appearsTV Guide On Screen setup Country Setup selectionPress / to select, then press Enter ZIP or postal code Cable serviceBasic Setup TV Guide On Screen setup Cable connectionTuning channel for the cable box Cable inputCable box brand name 12Antenna connection Press / to select, then press Enter 13Confirmation15Information 14ConfirmationRead the information and press Enter Press / to select Picture/Audio settings, then press Enter Output sound settingPress Setup Tip on settingPress / to select Audio out select, then press Enter Basic Setup Output sound settingPress / to select the output sound format Once the proper setting is selected, press PCMPress / to select Display settings, then press Enter TV shape settingPress Setup to display the setup menu Press / to select TV shape, then press When the proper setting is selected, press Press / to select the picture shapeRelease TV Code Remote control settingsOperating your TV with the remote control Take this step according to your preference and usageBrand code table RCASetting up the recorder Press Setup Press / to select Operational settings, then press EnterDisabling the remote control for a temporary period Your Responsibility Limited Ninety 90 Day Warranty on LaborLimited One 1 Year Warranty on Parts Rental UnitsHow to Obtain Warranty Services Page Memo Printed on 70% Recycled Paper