Arid

The TIME COOK feature allows you to preset the cooking time. The oven shuts off automatically.

Power Level 10 is automatically set for time cooking, but you may change this for more flexibility.

See your Cookbook.

To become better acquainted with TIME COOK function, make a cup of coffee by following the steps below.

Step 1: Fill a cup 2/3 full of water and add 1 teaspoon of freeze dried coffee. Use a cup that has no metal decoration. Place cup in oven and close door.

Step 2: Touch TIME COOK. The display shows :0, Signal light above TIME COOK flashes. Power Level 10 is automatically set, but does not appear on display.

Step 3: Select your time. Touch 1, 2 and Ofor a minute and 20 sec- onds. 1:20 and signal light above TIME COOK appear on display. If another Power Level is desired touch POWER LEVEL and the number, although Power Level 10 (HIGH) is preferred for this cup of coffee.

Step 4: Touch START. Time counting down shows on display.

Step 5: When time is up, oven sounds and oven, light, and fan shut off.

Q.I set my oven for the time called for in the recipe but at the end of the time allowed, my dish wasn’t done. What happened?

A. Since house power varies due to time or location, many Time Cook recipes give you a time range to prevent overcooking. Set the oven for minimum time, test the food for doneness, and cook your dish a little longer, if necessary.

Q. I want to cook my dish on a Power Level other than HIGH, what do I need to do?

A. To change the Power Level, touch the POWER LEVEL pad after entering desired cooking time. Enter the desired number and then touch START.

Q. Can I interrupt my Time Cook function to check the food?

A.Yes. To resume cooking, simply close the door and touch START. NOTE: Microwave power will not come on until you are ready. You must touch START for cooking to begin.

Q.i touched the number pads and selected my power level. When I touched START, however, my oven didn’t come on. Why not?

A.The TIME COOK pad must be touched before setting the number pads or else your oven will not be- gin cooking.

Q. I tried to change Power Level but the display changed back to cooking time. Why?

A.After touching Power Level pad you only have 4 seconds to enter the number. Try setting controls again.

JET210 specifications

The GE JET210 is a state-of-the-art jet engine that exemplifies the latest advancements in aeronautical engineering and technology. Designed for commercial and regional aircraft, the JET210 showcases a multitude of innovative features that enhance performance, efficiency, and overall flight experience.

One of the main features of the GE JET210 is its high bypass ratio fan. This design allows for greater propulsion efficiency, which translates to improved fuel consumption. With its ability to generate more thrust while consuming less fuel, the JET210 plays a crucial role in reducing the environmental impact of air travel. Coupled with advanced materials that withstand higher temperatures and pressures, the engine optimizes its performance while maintaining reliability.

Incorporating cutting-edge technology, the JET210 utilizes advanced aerodynamics to minimize drag and maximize thrust. The engine's fan blades are designed with state-of-the-art computational fluid dynamics, allowing for superior airflow management. This not only enhances performance in various flight conditions but also contributes to reduced noise levels, making the aircraft more environmentally friendly.

The engine's full authority digital engine control (FADEC) system is another highlight, providing optimized engine management and monitoring capabilities. This sophisticated system ensures the engine operates at peak efficiency, enabling pilots to manage power output seamlessly. The FADEC also contributes to engine reliability by continuously assessing performance parameters and providing the crew with real-time data for decision-making.

Additionally, the GE JET210 incorporates advanced maintenance features, aiming to reduce downtime and operating costs for airlines. Its modular design allows for easy access to critical components, simplifying the maintenance process. Predictive maintenance capabilities further enhance reliability, as they allow operators to identify potential issues before they lead to costly repairs or unexpected engine failures.

The JET210's compact design also makes it an ideal choice for various aircraft configurations, particularly in regional jets, where space is at a premium. Its lightweight construction, combined with robust performance characteristics, enables aircraft manufacturers to build more fuel-efficient and cost-effective aircraft.

In conclusion, the GE JET210 is a remarkable jet engine that combines advanced technologies, efficiency, and reliability. Its innovative design, high-performance capabilities, and focus on environmental sustainability position it as a leading choice for modern commercial aviation, catering to the future needs of the aerospace industry.