GE Comprehensive Installation Guide for JTP86 Microwave Oven

Page 1

Installation

30Built-In Wall Oven

Instructions

with Microwave

JTP86, JT965

If you have questions, call 1.800.GE.CARES or visit our website at: ge.com

Before You Begin

• Proper installation is the responsibility

of the installer and product failure due

Read these instructions carefully and completely.

to improper installation is NOT covered

IMPORTANT—Save these

under warranty.

NOTE—This appliance must be properly

instructions for local inspector’s use.

grounded.

IMPORTANT—Observe all

ATTENTION INSTALLER

governing codes and ordinances.

• Note to Installer—Be sure to leave these

All electric wall ovens must be hard wired

instructions with the consumer.

(direct wired) into an approved junction

• Note to Consumer—Keep these

box. A plug and receptacle is NOT permitted

on these products.

instructions for future reference.

 

 

 

Parts Included

Metal

Bottom Trim

Screws For

 

Installation

Plastic

 

Bottom Trim

Optional Metal Bottom Trim Assembly (on some models)

Materials Needed

Wire Nuts

Strain Relief Clamp

Junction

for 1/2conduit

Box

36of String

Tools Needed

1/8Drill Bit and

Phillips

Electric or Hand Drill

Screwdriver

31-10660

1-07 JR

1

Image 1
Contents Installation Installation Instructions Do not Lift the Door By the Handle Pre-Installation ChecklistInstallation Instructions Cutout Height 16 Min Max Cutout for Built-In Oven with MicrowaveJunction Box Location Electrical ConnectionsB4 Three-Conductor Branch Circuit Connection B3 New Construction Four-Conductor Branch Circuit ConnectionC1 Sliding the Oven Into the Opening Securing the Oven in the OpeningC2 Drilling the Pilot Holes and Mounting the Oven C4 Installing the Metal Bottom Trim C3 Preparing for the Bottom Trim InstallationC5 Installing the Plastic Bottom Replacing the Oven Door Pre-Test Checklist Operation Checklist