GE JTP86 installation instructions Installation Instructions

Page 4

Installation Instructions

Pre-Installation Checklist cont.

Place the oven on a table or platform even with the cutout opening. (Platform must support 255 lbs.)

Remove the bottom trim from the top of the oven. It will be installed at the end of the installation process. The trim is wrapped separately and taped to the top of the unit.

Image 4

Contents Installation Installation Instructions Pre-Installation Checklist Do not Lift the Door By the HandleInstallation Instructions Cutout for Built-In Oven with Microwave Cutout Height 16 Min MaxElectrical Connections Junction Box LocationB3 New Construction Four-Conductor Branch Circuit Connection B4 Three-Conductor Branch Circuit ConnectionC1 Sliding the Oven Into the Opening Securing the Oven in the OpeningC2 Drilling the Pilot Holes and Mounting the Oven C4 Installing the Metal Bottom Trim C3 Preparing for the Bottom Trim InstallationC5 Installing the Plastic Bottom Replacing the Oven Door Operation Checklist Pre-Test Checklist