For Your Safety, Electrical Requirements | GE JCKP70, JCTP30, JCKS10

Installation Instructions

IMPORTANT SAFETY INSTRUCTIONS

For Your Safety

•Be sure your oven is installed properly by a qualified installer or service technician.

•Be sure the oven is securely installed in a cabinet that is firmly attached to the house structure. Weight on the oven door could cause the oven to tip and result in injury. Never allow anyone to climb, sit, stand or hang on the oven door.

•Make sure the cabinets and wall coverings

around the oven can withstand the temperatures (up to 93°C [200°F]) generated by the oven.

WARNING: The electrical

power to the oven supply line must be shut off while line connections are being made. Failure to do so could result in serious injury

or death.

Electrical

Requirements

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or fuse. See the rating plate located on the oven frame to determine the rating of the product. Use the chart below to determine the minimum recommended dedicated circuit protection.

			Recommended
	KW Rating	KW Rating	Circuit Size
	240V	208V	(Dedicated)
	≤4.8 KW	≤4.1 KW	20 Amp
4.9	KW–7.2 KW	4.3 KW–6.2 KW	30 Amp
7.3	KW–9.6 KW	6.3 KW–8.3 KW	40 Amp
9.7	KW–12.0 KW	8.4 KW–10.4 KW	50 Amp

Electrical Requirements (cont.)

Rating Plate is located on oven side trim, side front frame or lower front frame.

Rating Plate

Location

We recommend you have the electrical wiring and hookup of your oven connected by a qualified electrician. After installation, have the electrician show you where your main oven disconnect is located.

Check with your local utilities for electrical codes which apply in your area. Failure to wire your oven according to governing codes could result in a hazardous condition. If there are no local codes, your oven must be wired and fused to meet the requirements of CAN/ CSA C22.2 No. O-M91 or latest edition.

You must use a three-wire, single-phase A.C. 208Y/120 Volt or 240/120 Volt, 60 hertz electrical system. If you connect to aluminum wiring, properly installed connectors approved for use with aluminum wiring must be used.

PCT920, PCT916, PCK916, PCK920, JCTP70 specifications

The GE JCTP30, JCKS10, JCKP70, JCKP30, and JCTP70 are notable products from General Electric's diverse portfolio designed for various industrial applications. Each of these models exhibits distinct features and technologies tailored to maximize efficiency, reliability, and performance across different sectors.

Starting with the GE JCTP30, this model stands out for its compact design, making it ideal for applications with limited space. It is powered by advanced technology that ensures high throughput while maintaining energy efficiency. The JCTP30 incorporates a user-friendly interface that simplifies control and monitoring, enhancing operational ease.

The JCKS10, in contrast, is recognized for its robust construction and versatility. It is designed explicitly for harsh environments, featuring extensive protection against dust and moisture. This model supports a wide range of input/output configurations, allowing it to adapt seamlessly to various industrial processes and requirements.

Next is the GE JCKP70, which focuses on performance optimization. This unit features high-speed processing capabilities, making it suitable for time-sensitive operations. Along with its rapid operation, the JCKP70 is equipped with cutting-edge safety features, ensuring compliance with industry standards while safeguarding operators and equipment.

The JCKP30 model is tailored for applications needing precision and accuracy. With a sophisticated control system, this unit facilitates precise adjustments and monitoring, enabling operators to fine-tune processes as needed. Its integration capabilities allow it to work harmoniously with existing systems, promoting operational continuity.

Lastly, the GE JCTP70 combines high efficiency and scalability, making it a prime choice for expanding operations. This model supports modular upgrades, allowing businesses to expand their capabilities without significant overhauls. The JCTP70 also employs smart technology for real-time analytics, empowering users to make data-driven decisions to enhance productivity.

In summary, the GE JCTP30, JCKS10, JCKP70, JCKP30, and JCTP70 all showcase General Electric's commitment to innovation and excellence. Each model is equipped with a unique set of features and advanced technologies that cater to the varying demands of industrial applications. Through their combination of efficiency, reliability, and adaptability, these models help companies streamline operations and drive growth in an increasingly competitive landscape.