Electrical Connections

Installation Instructions

ATTENTION INSTALLER

All electric wall ovens must be hard wired (direct wired) into an approved junction box. A plug and receptacle is NOT permitted on these products.

DO NOT shorten the flexible conduit. The conduit strain relief clamp must be securely attached to the junction box and the flexible conduit must be securely attached to the clamp. If the flexible conduit will not fit within the clamp, do not install the oven until a clamp of the proper size is obtained.

Turn off the circuit breaker or remove fuses

B1 to the oven branch circuit.

With the oven supported on a table or

B2 platform in front of the cabinet opening, connect the flexible conduit to the electrical junction box as shown below. Position the conduit in such a manner that it will lie on top of the oven in a natural loop when the oven is installed. You will need to purchase an appropriate strain relief clamp to complete the connection of the conduit

to the junction box.

Junction Box

Location

NOTE TO ELECTRICIAN: The 3 power leads supplied with this appliance are CSA recognized for connection to heavier gauge household wiring. The insulation of these 3 leads is rated at temperatures much higher than the temperature rating of household wiring. The current carrying capacity of the conductor is governed by the wire gauge and the temperature rating of the insulation around the wire.

WARNING: Improper

connection of aluminum house wiring to copper leads can

Conduit

Place oven on a support to assist in connecting conduit

GROUND

WIRE

BARE

GROUND RED

WHITE

BLACK

Strain Relief Clamp (not included) must be used at Junction Box

result in an electrical hazard or fire. Use only connectors designed for joining copper to aluminum and follow the manufacturer’s recommended procedure closely.

This oven is supplied with a 123 cm (48”)

B3 long flexible conduit consisting of:

3 insulated conductors (copper)

1 bare ground conductor (copper)

Attach conductors to residence wiring as

B4 shown by wiring diagram.

CONDUIT
FROM		WHITE
OVEN		(NEUTRAL)
	RED
	BLACK
	BARE
	COPPER
		WHITE
	BLACK	RED
	BLACK
	GROUND

CSA APPROVED

JUNCTION BOX AND COVER

CSA APPROVED

CONNECTOR

TO BREAKER PANEL #12-#10 AWG-COPPER NMD90 WIRE. FUSE 20 AMP CIRCUIT BREAKERS

PCT920, PCT916, PCK916, PCK920, JCTP70 specifications

The GE JCTP30, JCKS10, JCKP70, JCKP30, and JCTP70 are notable products from General Electric's diverse portfolio designed for various industrial applications. Each of these models exhibits distinct features and technologies tailored to maximize efficiency, reliability, and performance across different sectors.

Starting with the GE JCTP30, this model stands out for its compact design, making it ideal for applications with limited space. It is powered by advanced technology that ensures high throughput while maintaining energy efficiency. The JCTP30 incorporates a user-friendly interface that simplifies control and monitoring, enhancing operational ease.

The JCKS10, in contrast, is recognized for its robust construction and versatility. It is designed explicitly for harsh environments, featuring extensive protection against dust and moisture. This model supports a wide range of input/output configurations, allowing it to adapt seamlessly to various industrial processes and requirements.

Next is the GE JCKP70, which focuses on performance optimization. This unit features high-speed processing capabilities, making it suitable for time-sensitive operations. Along with its rapid operation, the JCKP70 is equipped with cutting-edge safety features, ensuring compliance with industry standards while safeguarding operators and equipment.

The JCKP30 model is tailored for applications needing precision and accuracy. With a sophisticated control system, this unit facilitates precise adjustments and monitoring, enabling operators to fine-tune processes as needed. Its integration capabilities allow it to work harmoniously with existing systems, promoting operational continuity.

Lastly, the GE JCTP70 combines high efficiency and scalability, making it a prime choice for expanding operations. This model supports modular upgrades, allowing businesses to expand their capabilities without significant overhauls. The JCTP70 also employs smart technology for real-time analytics, empowering users to make data-driven decisions to enhance productivity.

In summary, the GE JCTP30, JCKS10, JCKP70, JCKP30, and JCTP70 all showcase General Electric's commitment to innovation and excellence. Each model is equipped with a unique set of features and advanced technologies that cater to the varying demands of industrial applications. Through their combination of efficiency, reliability, and adaptability, these models help companies streamline operations and drive growth in an increasingly competitive landscape.