GE PCT916, JCTP30, JCKS10, JCKP70, JCKP30, JCTP70 Cutout for 30″ 76.2 cm Single Built-In Ovens only

Page 7
For JCTP30, JCTP70, PCT916, PCT920 models only.

Installation Instructions

A

Cutout for 30″ (76.2 cm) Single Built-In Ovens only

Under Counter

Gas or electric cooktops may be installed over this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models.

63.5 cm (25”)

240V / 208V Junction Box Location (junction box may be in adjacent cabinet)

24.1 cm (9 1/2”)

Max.

Gas and electrical connections for gas cooktop must be located in an adjacent accessible location to the right.

Top and/or side fillers may be necessary

if unit is positioned between existing cabinets. Be sure they are attached securely, since they will anchor the oven in the cabinet.

1.9cm (3/4”)

Support Platform

Required

72.4 cm

(28 1/2”) Min.

72.7 cm

(28 5/8”) Max.

69.2 cm

(27 1/4”) Min.

69.4 cm

(27 5/16”) Max.

Allow 2.5 cm (1”) overlap top of oven,

1.8cm (11/16”) overlap side edges of cutout and 3.2 cm (1 1/4”) overlap bottom of cutout

Must match toekick height

55.9cm (22”)

Min. Above Support Platform

61 cm (24”)

10.2 cm (4”)

Typical

Toekick

91.4cm (36”)

Typical Countertop Height

MUST SUPPORT 68 Kg (150 LBS.)

NOTE: This oven is only approved to be installed under the specific models as labeled on this unit.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Tools Needed Before You BeginParts Included Materials NeededElectrical Requirements For Your SafetyDo not Lift the Door By the Handle Pre-Installation ChecklistFor JCKP30, JCKP70, JCKS10, PCK916, PCK920 models only Cutout for 27″ 68.6 cm Single Built-In Ovens onlyOvens only For JCTP30, JCTP70, PCT916, PCT920 models only Cutout for 30″ 76.2 cm Single Built-InUnder Counter Cutout for 27″ 68.6 cm Single Built-In Ovens onlyCutout for 30″ 76.2 cm Single Built-In Ovens only For JCTP30, JCTP70, PCT916, PCT920 models only Electrical Connections Connection of aluminum house wiring to copper leads canC1 Sliding the Oven Into the Opening Securing the Oven in the OpeningC3 Preparing for the Bottom Trim Installation Replacing the Oven Door Pre-Test Checklist Operation ChecklistPage Page ’essai avant vérification de Liste ’essai pour vérification de ListeFour du porte la Fermez Four du porte la de place en RemiseInférieure garniture la de Montage du Préparation Avertissement ’ouverture dans four du FixationBague Une Électrique RaccordementDirectives aux vous-Reportez .simple encastré Po 30 comptoir d’un dessous au Po 27 comptoir d’un dessous au Po 30 simples SeulementEncastrés fours pour Ouverture a Max po 1/8 28 cm 71,4 Encastrés fours pour OuvertureUne ou table une sur four le Placez Montage avant vérification de ListeSécurité votre Pour AlimentationCommencer de Avant Requis OutilsRequis Matériel Incluses Pièces

PCT920, PCT916, PCK916, PCK920, JCTP70 specifications

The GE JCTP30, JCKS10, JCKP70, JCKP30, and JCTP70 are notable products from General Electric's diverse portfolio designed for various industrial applications. Each of these models exhibits distinct features and technologies tailored to maximize efficiency, reliability, and performance across different sectors.

Starting with the GE JCTP30, this model stands out for its compact design, making it ideal for applications with limited space. It is powered by advanced technology that ensures high throughput while maintaining energy efficiency. The JCTP30 incorporates a user-friendly interface that simplifies control and monitoring, enhancing operational ease.

The JCKS10, in contrast, is recognized for its robust construction and versatility. It is designed explicitly for harsh environments, featuring extensive protection against dust and moisture. This model supports a wide range of input/output configurations, allowing it to adapt seamlessly to various industrial processes and requirements.

Next is the GE JCKP70, which focuses on performance optimization. This unit features high-speed processing capabilities, making it suitable for time-sensitive operations. Along with its rapid operation, the JCKP70 is equipped with cutting-edge safety features, ensuring compliance with industry standards while safeguarding operators and equipment.

The JCKP30 model is tailored for applications needing precision and accuracy. With a sophisticated control system, this unit facilitates precise adjustments and monitoring, enabling operators to fine-tune processes as needed. Its integration capabilities allow it to work harmoniously with existing systems, promoting operational continuity.

Lastly, the GE JCTP70 combines high efficiency and scalability, making it a prime choice for expanding operations. This model supports modular upgrades, allowing businesses to expand their capabilities without significant overhauls. The JCTP70 also employs smart technology for real-time analytics, empowering users to make data-driven decisions to enhance productivity.

In summary, the GE JCTP30, JCKS10, JCKP70, JCKP30, and JCTP70 all showcase General Electric's commitment to innovation and excellence. Each model is equipped with a unique set of features and advanced technologies that cater to the varying demands of industrial applications. Through their combination of efficiency, reliability, and adaptability, these models help companies streamline operations and drive growth in an increasingly competitive landscape.
Top Page Image Contents