Milan Technology MIL-W1311 Configuration Program, Preparation, Connecting to the Wireless Gateway

Models: MIL-W0311 MIL-W1311

1 100
Download 100 pages 20.39 Kb
Page 14
Image 14
Configuration Program

Configuration

Where use of a certain feature requires that PCs or other LAN devices be configured, this is also explained in the relevant chapter.

Configuration Program

The Wireless Gateway contains an HTTP server. This enables you to connect to it, and config- ure it, using your Web Browser.

Most Browsers should work, provided they support HTML tables and forms.

Preparation

Before attempting to configure the Wireless Gateway, please ensure that:

Your PC can establish a physical connection to the Wireless Gateway. The PC and the Wireless Gateway must be directly connected (using the “PC” port on the Wireless Gate- way) or on the same LAN segment.

The Wireless Gateway must be installed and powered ON.

If the Wireless Gateway's default IP Address (192.168.0.1) is already used by another device, the other device must be turned OFF until the Wireless Gateway is allocated a new IP Address during configuration.

Connecting to the Wireless Gateway

To establish a connection from your PC to the device:

1.After installing the Wireless Gateway in your LAN, start your PC. If your PC is already running, restart it.

2.Start your WEB browser.

3.In the Address box, enter "HTTP://" and the IP Address of the Wireless Gateway, as in this example, which uses the Wireless Gateway’s default IP Address:

HTTP://192.168.0.1

4.You should then see the Quick Setup screen.

See the following section for details on using this screen.

If you can't connect

If the Wireless Gateway does not respond, check the following:

The Wireless Gateway is properly installed, LAN connection is OK, and it is powered ON.

Ensure that your PC and the Wireless Gateway are on the same network seg- ment. (If you don't have a router, this must be the case.)

If your PC is using a fixed IP Address, its IP Address must be within the range 192.168.0.2 to 192.168.0.254 to be compatible with the Wireless Gateway's de- fault IP Address of 192.168.0.1. Also, the Network Mask must be set to 255.255.255.0. See Chapter 4 – PC Configuration for details on checking your PC’s TCP/IP settings.

11

Page 14
Image 14
Milan Technology MIL-W1311 Configuration Program, Preparation, Connecting to the Wireless Gateway, If you cant connect