Milan Technology MIL-W0311, MIL-W1311 manual Buttons, WEP Status, Save, Cancel

Wireless Gateway User Guide

WEP Status	This will state "Enabled" or "Disabled".
	The default is "Disabled".
	•	In order to use the Wireless Gateway's access point, the client
		wireless stations must have the same settings for WEP.
	•	To change the Wireless Gateway's WEP settings, use the Wireless
		screen, described in the following section.
Buttons
Save	Save any data you have entered on this screen. Remember to save before
	changing to another screen.
Cancel	Cancel any changes you have made since the last "Save" operation.

Once this screen is completed, the Wireless Gateway is ready for use.

•If you wish to use WEP, or change other Wireless Access Point settings, refer to the following section.

•Your PCs may require configuration. Refer to Chapter 4 - PC Configuration for details.

•To check the status of the Wireless Gateway, and confirm that it is working correctly, refer to the Status Screen section later in this Chapter.

16