Milan Technology MIL-W0311, MIL-W1311 manual Connection Log, nnnnnn bps, Message, Description

Wireless Gateway User Guide

Physical Link	If operating, the link will show ON. This means the modem was able to
	connect to the number dialed.
PPP Link	If ON, a PPP connection was successfully negotiated.

PPPIP Address This has 2 possible meanings, depending of the type of connection:

•Internet Access - This is the IP Address used by this device, as seen by Internet users. This address is provided by your ISP.

•Dial-in- This is the IP Address used by the remote user. This IP Address is allocated by the DHCP Server function in the Wireless Gateway.

User	There are 2 possibilities:
	•	For Internet Access, this shows the Internet Account name.
	•	For Dial-in operations, this shows the current user.
Phone Line	The connection speed over the phone line, between your modem and
Speed	the number dialed, as reported by your modem.
Serial Line	The connection speed between this device and the modem. This setting
Speed	can be changed on the Serial Port screen.
Log
Connection Log	This displays connection details.
	See below for a description of the most common items in this log.

Connection Log

This shows the commands sent to the modem, and any status messages returned by the modem. Note that you must click Refresh to update the information.

The following table lists the common messages, and their meaning.

Message	Description
Dialing	Dialing the ISP
Try to establish	The device is trying to connect with the ISP, using the modem.
physical connection.
Busy	The number dialed was busy.
Physical line is	Physical connection to ISP has been established.
connected
CONNECT nnnnnn	Physical connection was successful; nnnnnn indicates the speed of
	the serial link as currently configured.
Max phone line speed	nnnnnn is the maximum speed of the modem, according to the
nnnnnn bps	current configuration.
DCD low,	Physical line break, connection lost.
DSR low
send "-----"	"AT" commands sent to the modem are displayed as they are sent.
wait "-----"	Commands in the Script file are also displayed as they are executed.

52